- 새로운 주입 기술로 정밀한 비율의 혼합이 보장되어 생산성은 증가하고 낭비는 감소
- 실시간으로 비율을 표시해 주는 직관적인 첨단 사용자 제어
- 과거의 분사 데이터에 간편하게 접근하여 다운로드 할 수 있게 해주는 USB 포트
- 생산성 향상을 위해 다양한 스프레이 건 지원
- 에어 모터에 아이 훅 부착으로 크레인을 사용한 손쉬운 운반
- 가변 비율 시스템 - 1:1 - 10:1의 도료 비율 처리
XM 이액형 도장기 이액형 도장의 새로운 혁명을 경험하십시오.
보호 코팅용 고압 장치
완벽한 설정이 가능한 시스템을 통해 정밀한 비율 보장
가장 까다로운 보호용 코팅도 처리할 수 있도록 설계된 Graco XM 이액형 도장기는 정밀한 비율 제어를 제공하고, 사용자가 과거의 도장 데이터를 다운로드 할 수 있게 하며, 다양한 범위의 이액형 도료를 처리합니다.
비율 제어의 핵심에는 Graco의 첨단 주입 기술이 있습니다. 주요 성분은 지속적으로 흐르고, 보조 성분은 더 고압으로 주입됩니다 첨단 감지 기술을 통해 펌프가 압력 변화를 보정함으로써 정밀한 비율의 혼합을 통해 생산성은 증가하고 낭비는 줄어듭니다.
교량, 철도, 풍력발전 설비 등에 이상적인 Graco XM은 사용자의 코팅 작업에 맞는 완벽한 설정이 가능합니다. 먼저 기본 모델로 시작하십시오. 그런 다음 필요한 액세서리를 선택하십시오. 꼭 필요한 것만 구입하십시오. 그 이상도 이하도 아닙니다.
매뉴얼
- 3A0013L - XM 이액형 도장기, 작동, 한국의 [기타 언어]
- 3A0360U - XM 복형 성분 스프레이어, 수리-부품, 한국의 (noptc) [기타 언어]
- 313292H - XM Plural Component OEM Unit, Installation - Parts, English (noptc) (영어만 해당)
- 312747L - Double Wall Hopper, Instructions-Parts, English [기타 언어]
- 3A0340H - XM 혼합 다기관 키트, 지침 - 부품, 한국어 (noptc) [기타 언어]
- 312770D - Lower Strainer and Valve Kit, 256653 Installation-Parts, English (영어만 해당)
- 313258C - Electric Heated Hose Power Supply Kit 256876, Instructions-Parts, English (영어만 해당)
- 313529M - Tandem Supply Systems, Repair-Parts, English [기타 언어]
- 313293C, Alternator Conversion Kit, Instructions-Parts, English (영어만 해당)
- 3A0351D, Dosing Valve, Instructions-Parts, Korean [기타 언어]
- 313343A, Shutoff Check Valve, Instructions-Parts, U.S. English (영어만 해당)
- 406691C, Hose Rack Kit, 256263, US English (영어만 해당)
- 406699D 7 Gallon XM Hopper Installation Kit, 256260, English (영어만 해당)
- 406739C - Desiccant Kits, Instructions, English (영어만 해당)
- 406740A, Level Sensor Adapter Kit 256261, US English (영어만 해당)
- 313259F - Hopper or Hose Heat Circulation Kit, Instructions-Parts, English (영어만 해당)
3A0013L - XM 이액형 도장기, 작동, 한국의
3A0360U - XM 복형 성분 스프레이어, 수리-부품, 한국의 (noptc)
312747L - Double Wall Hopper, Instructions-Parts, English
3A0340H - XM 혼합 다기관 키트, 지침 - 부품, 한국어 (noptc)
자료
- Graco XM Plural-Component Sprayers Brochure [기타 언어]
- 349329EN-B, Parts and Accessories for Protective Coatings Equipment [기타 언어]
- Graco Wind Energy Brochure (English) (영어만 해당)
- 349706EN-A, Xtreme-Duty Agitator [기타 언어]
Graco XM Plural-Component Sprayers Brochure
349329EN-B, Parts and Accessories for Protective Coatings Equipment
XM Plural-Component Sprayers | |
Mixed Ratio Range |
1:1-10:1 (in 0.1 increments)
1:1-10:1 (in 0.1 increments)
|
Ratio Tolerance Range (before alarm) |
+/- 5%
+/- 5%
|
Minimum Flow Rate |
1 qt/min
0.95 l/min
|
Maximum Flow Rate |
3 gal/min
11.4 l/min
|
Fluid Viscosity Range |
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
|
Fluid Filtration |
60 mesh, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
|
Air Inlet |
3/4 npt(f)
3/4 npt(f)
|
Fluid inlets without feed kits |
1 1/4 npt(m)
1 1/4 npt(m)
|
50:1 Maximum Fluid Working Pressure of mixed material |
5200 psi
35.8 MPa/358 bar
|
70:1 Maximum Fluid Working Pressure of mixed material |
6300 psi
43.5 MPa/435 bar
|
Maximum Fluid Temperature |
160° F
71° C
|
Air Supply Pressure Range |
50-150 psi
0.35-1.0 MPa/3.5-10.3 bar
|
50:1 Maximum pump air set pressure |
100 psi
0.70 MPa/7.0 bar
|
70:1 Maximum pump air set pressure |
90 psi
0.62 MPa/6.2 bar
|
Maximum pump inlet fluid feed pressure |
250 psi
1.7 MPa/17 bar
|
Maximum Air Consumption |
70 scfm per gpm (at 100 psi in scfm)
1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min
|
Air Filtration |
40 micron main filter, 5 micron control air filter
40 micron main filter, 5 micron control air filter
|
Ambient Operating Temperature Range |
32 to 130° F
0 to 54° C
|
Ambient Storage Temperature Range |
30 to160° F
-1 to 71° C
|
Environmental Conditions Rating |
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 130° F, Pollution Degree (11), Installation category (2)
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2)
|
Sound Pressure |
86 dBA at 100 psi
86 dBA at 0.7 MPa, 7 bar
|
Sound Power |
98 dBA at 100 psi
98 dBA at 0.7 MPa, 7 bar
|
Weight |
Base sprayer (XM1A00 and XM5A00 models) 742 lb (add component weights to base sprayer weight for your specific model weight)
Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight)
|
Wetted parts | |
Suction Tubes |
Aluminum
Aluminum
|
Flush Pump |
Carbide, PTFE, stainless steel, UHMWPE
Carbide, PTFE, stainless steel, UHMWPE
|
Hoses |
Nylon
Nylon
|
Pumps (A and B) |
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
|
Metering Valves |
Carbon Steel, nickel plating, carbide, polyethylene, leather
Carbon Steel, nickel plating, carbide, polyethylene, leather
|
Manifold |
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
|
Mixer |
Stainless steel housing with acetal elements
Stainless steel housing with acetal elements
|