Grow your business with joint and crack fill services
The unheated Reactor E-10 for flooring applications is equipped with on-board tanks -- making it simple to accurately mix higher-viscosity materials.
Unheated Reactor E-10 for Flooring Portable joint fill equipment
For medium to large no-heat joint fill applications
- Weighs just 150 lb (68 kg)
- Materials are gravity-fed from on-board tanks
- Handles higher-viscosity materials
- Max output of 0.50 gpm (1.9 lpm)
- Simple start & stop with single knob operation
- Plugs into a standard electrical wall unit
- Easy to maneuver, even in tight areas
Kılavuzlar
Belgeler
| Reactor E-10 Plural Component Proportioner | |
| U.S. |
Metric
Metric
|
| Maximum Fluid Working Pressure |
2000 psi
14 MPa, 140 bar
|
| Electrical Requirements | |
|
Model AP9570, CS9570: 120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
Model AP9570, CS9570: 120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
|
|
|
Model AP9571, CS9571: 240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
Model AP9571, CS9571: 240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
|
|
|
Model AP9572, CS9572: 240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
Model AP9572, CS9572: 240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
|
|
|
Model 249806, 24R984: 120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
Model 249806, 24R984: 120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
|
|
|
Model 249808, 24R985: 240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
Model 249808, 24R985: 240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
|
|
| Generator Size (for Reactor E-10 only) |
Heated: 5000 W minimum, Nonheated: 2500 W minimum
Heated: 5000 W minimum, Nonheated: 2500 W minimum
|
| Maximum Fluid Temperature |
160°F
71°C
|
| Maximum Ambient Temperature |
110°F
43°C
|
| Maximum Output |
12 lb/min (5.4 kg/min) at 340 cycles/min
12 lb/min (5.4 kg/min) at 340 cycles/min
|
| Output per Cycle (A and B) |
.00352 gal
.0133 liter
|
| Overpressure Relief |
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
|
| Heater Power |
120V models: 850 W each; 1700 W total, 240V models: 1000 W each; 2000 W total
120V models: 850 W each; 1700 W total, 240V models: 1000 W each; 2000 W total
|
| Sound Pressure |
78.7 dB(A) in fast circulation mode, 84.5 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
78.7 dB(A) in fast circulation mode, 84.5 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
|
| Sound Power, per ISO9614-2 |
88.6 dB(A) in fast circulation mode, 94.4 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
88.6 dB(A) in fast circulation mode, 94.4 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
|
| Tank Capacity |
7 gal each nominal
26.5 liters each nominal
|
| Fluid Outlets |
Component A (ISO):-5 JIC male, Component B (RES):-6 JIC male
Component A (ISO):-5 JIC male, Component B (RES):-6 JIC male
|
| Fluid Circulation Returns |
Component A (ISO):-5 JIC male, Component B (RES):-6 JIC male
Component A (ISO):-5 JIC male, Component B (RES):-6 JIC male
|
| Air Inlet |
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
|
| Air Outlet |
1/4 npsm(m)
1/4 npsm(m)
|
| Gun Compressed Air Requirements |
Fusion Gun (purge air and operating air): 4 scfm (0.112 m3/min), MD2 Gun with disposable mixer kit: 14 scfm (0.392 m3/min), with airspray valve fully open, MD2 Gun with joint fill kit: 2 scfm (.056 m3/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m3/min), MD2 Gun with disposable mixer kit: 14 scfm (0.392 m3/min), with airspray valve fully open, MD2 Gun with joint fill kit: 2 scfm (.056 m3/min)
|
| Hose Markings |
A Side: Red, B Side: Blue
A Side: Red, B Side: Blue
|
| Weight (empty) |
Approximately 160 lb, depending on model
Approximately 72 kg, depending on model
|
| Wetted Parts |
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight poly-ethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight poly-ethylene
|
| All other brand names or marks are used for identification purposes and are trademarks of their respective owners. | |
| Reactor E-10 | |
| Maximum Fluid Working Pressure |
2000 psi
140 bar, 14 MPa
|
| Maximum Fluid Temperature |
160°F
71°C
|
| Maximum Ambient Temperature |
110°F
43°C
|
| Maximum Output at 340 cycles/min |
12 lb/min
5.4 kg/min
|
| Output per Cycle (A and B) |
0.00352 gal
0.0133 liter
|
| Overpressure Relief |
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
|
| Weight (approximately, depending on model) |
160 lb
72 kg
|
| Wetted Parts |
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
|
| Electrical Requirements | |
| Model AP9570, CS9570: |
120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
|
| Model AP9571, CS9571: |
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
|
| Model AP9572, CS9572: |
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
|
| Model 249806: |
120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
|
| Model 249808: |
240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
|
| Generator Size (for Reactor E-10 only) | |
| Heated: |
5000 W minimum
5000 W minimum
|
| Nonheated: |
2500 W minimum
2500 W minimum
|
| Heater Power | |
| 120V models: |
850 W each; 1700 W total
850 W each; 1700 W total
|
| 240V models: |
1000 W each; 2000 W total
1000 W each; 2000 W total
|
| Sounds Pressure | |
| Fast Circulation Mode: |
78.7 dB(A)
78.7 dB(A)
|
| At 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm): |
84.5 dB(A)
84.5 dB(A)
|
| Sound Power, measured per ISO 9416–2 | |
| Fast Circulation Mode: |
88.6 dB(A)
88.6 dB(A)
|
| At 2000 psi (14 MPa, 140 bar, 0.72 gpm (2.7 lpm): |
94.4 dB(A)
94.4 dB(A)
|
| Tank Capacity (nominal) |
7 gal
26.5 liters
|
| Fluid Outlets | |
| Component A (ISO): |
-5 JIC male
-5 JIC male
|
| Component B (RES): |
-6 JIC male
-6 JIC male
|
| Fluid Circulation Ports | |
| Component A (ISO): |
-5 JIC male
-5 JIC male
|
| Component B (RES): |
-6 JIC male
-6 JIC male
|
| Air Inlet |
1/4 in quick-disconnect industrial type pin fitting
1/4 in quick-disconnect industrial type pin fitting
|
| Air Outlet |
1/4 npsm(m)
1/4 npsm(m)
|
| Gun Compressed Air Requirements | |
| Fusion Gun (purge air and operating air): |
4 scfm
0.112 m³/min
|
| 2K Ultra-Lite Gun with disposable mixer kit, with air spray valve fully open: |
14 scfm
0.392 m³/min
|
| 2K Ultra-Lite Gun with joint fill kit: |
2 scfm
0.056 m³/min
|
| Hose Markings | |
| A Side |
Red
Red
|
| B Side |
Blue
Blue
|
