Hydra-Cat vaste mengverhouding Mechanische verdeler
Door het ontwerp met meerdere onderpompen worden tweecomponentenmaterialen nauwkeurig gedoseerd
Hydra-Cat-verdelers met een vaste mengverhouding pompen meercomponentenmaterialen nauwkeurig door twee of drie positieve verdringerpompen aan te drijven met één gemeenschappelijke luchtmotor. Dit zorgt ervoor dat de slagfrequentie en -lengte van alle onderpompen hetzelfde blijft, zodat een constante dosering gegarandeerd is.
Modellen met twee onderpompen van dezelfde grootte bieden evenwichtige pompkracht, waardoor voortijdige slijtage van de pakking wordt voorkomen. Modellen met drie onderpompen en cilinders van verschillende grootten kunnen worden geselecteerd om voor een breed scala aan mengverhoudingen te zorgen.
Bent u op zoek naar een nieuwe versie van uw Hydra-Cat? Graco's aanbod van XP-spuitpistolen voor meercomponentenmaterialen biedt uitkomst.
- Onderpompen voor de zwaarste belasting slijten langzaam en gaan langer mee
- Configuraties met meerdere onderpompen maken een brede keuze aan mengverhoudingen mogelijk
- De configuratie met twee onderpompen biedt een consistente 1:1-mengverhouding
- De configuratie met drie onderpompen biedt mengverhoudingen van meer dan 1:1 voor een gelijkmatige pompwerking
- PTFE-pakkingen zijn standaard bij Hydra-Cat-onderpompen
Handleidingen
- 308225K - Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps, Instructions-Parts, English [overige talen]
- 308224H - President Hydra-Cat Proportioning Pumps, Instructions-Parts, English [overige talen]
- 192759G, Fixed Ratio Hydra-Cat, Two Lowers, Wall or Stand Mounted, EU-Declaration of Conformity, English (Alleen Engels)
- 192984K, Fixed Ratio Hydra-Cat, Bare Pump Model, EU-Declaration of Conformity, English (Alleen Engels)
- 193731H, Fixed Ratio Hydra-Cat, Wall or Stand Mounted, EU-Declaration of Conformity, English (Alleen Engels)
President Hydra-Cat Fixed Ratio Proportioning Pumps | |
Pumps | |
Air operating range |
40–100 psi
0.3–0.7 MPa, 3–7 bar
|
Air consumption |
See example below
See example below
|
Fluid inlet size |
3/4 npt
3/4 npt
|
Fluid outlet size |
3/8 npt
3/8 npt
|
Air inlet size |
3/4 npt
3/4 npt
|
Maximum fluid outlet pressure |
3000 psi
21 MPa, 210 bar
|
Maximum fluid inlet pressure |
250 psi
1.7 MPa, 17 bar
|
Wetted parts |
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
|
Manifold assemblies | |
Manifold outlets |
3/8 npt
3/8 npt
|
Hoses |
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
|
Hoses |
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 210 bar maximum working pressure
|
Automatic pressure relief valves wetted parts |
303 stainless steel, Tungsten carbide, fluoroelastomer
303 stainless steel, Tungsten carbide, fluoroelastomer
|
Sound, Tested in accordance with ISO 9614–2. | |
Sound pressure levels (dBa), (Input air pressures at 15 cycles/min.) |
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
|
Sound power levels (dBa), (Input air pressures at 15 cycles/min.) |
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
|
Air consumption example | |
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. Xper minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. |
Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps | |
Pumps | |
Air operating range |
40–100 psi
280–700 kPa, 2.8–6.37 bar
|
Air consumption |
See example below
See example below
|
Fluid inlet size |
3/4 npt
3/4 npt
|
Fluid outlet size |
3/8 npt
3/8 npt
|
Air inlet size |
3/4 npt
3/4 npt
|
Maximum fluid outlet pressure |
3000 psi
21 MPa, 207 bar
|
Maximum fluid inlet pressure |
250 psi
1.7 MPa, 17 bar
|
Wetted parts |
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
|
Manifold assemblies | |
Manifold outlets |
3/8 npt
3/8 npt
|
Hoses |
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
|
Hoses |
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 207 bar maximum working pressure
|
Automatic pressure relief valves wetted parts |
303 stainless steel, tungsten carbide, fluoroelastomer
303 stainless steel, tungsten carbide, fluoroelastomer
|
Air consumption example | |
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. |
Aanverwante producten
-
PressureTrak Ratio Assurance for XP Sprayers
-
XP35-spuitapparaat voor meercomponentenmaterialen
Voor toepassingen van beschermende coatings onder een lage druk
-
XP50- en XP50-hf-spuitapparaat voor meercomponentenmaterialen
Voor beschermende coatings met een groter volume
-
XP70- en XP70-hf-spuitapparaten voor meercomponentenmaterialen
Hoge-drukprestaties voor tweecomponentencoatings met ee...