Graco Inc.

Wolverine Hazardous Location Pumps  AC and DC Operated Chemical Injection Pumps

Hazardous location pumps with explosion proof pump motors designed to operate in applications requiring Class 1, Division 1 rated products.

Dónde comprarSolicitar información
Compartir |

Wolverine hazardous location chemical injection pumps are designed for injecting chemicals at well sites and pipelines. Explosion proof motors are an integral part of the Hazardous location pumps designed to operate in applications requiring Class 1, Division 1 rated products.

  • Easily integrated with Graco chemical injection solar powered systems.
  • Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
  • Our injection pumps are designed for up to two years of operation before simple repairs.
  • Each pump features an adjustable fluid packing that lasts up to 25 times longer than non-adjustable seals.
  • All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust.

  • The AC and DC operated motors are rated for use in Division 1 Hazardous (Classified) Locations.
  • Flow rates up to 320 gpd (1,211 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).
  • Long lasting seals can easily be replaced in less than ten minutes, on location.
  • Precision stroke adjustment between ½ in to 1 in (12.7 mm to 25.4 mm) ensures accurate injection rates.
  • HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
  • Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system.
Ver valores en unidades métricas. Ver valores en unidades de EE. UU..

Wolverine Chemical Injection Pump
Maximum fluid working pressure
Varies by model. See instruction manual 334513
Varies by model. See instruction manual 334513
Input Voltage
CI-12X-XXX-XXX-X
12 VDC
12 VDC
CI-1AX-XXX-XXX-X
115 VAC
115 VAC
CI-2AX-XXX-XXX-X
230 VAC
230 VAC
CI-4AX-XXX-XXX-X
230 VAC or 460 VAC 3 Phase
230 VAC or 460 VAC 3 Phase
Input Current
CI-12S-XXX-XXX-X
11 A maximum (small motor)
11 A maximum (small motor)
CI-12L-XXX-XXX-X
16 A maximum (large motor)
16 A maximum (large motor)
CI-1AX-XXX-XXX-X
2.0 A
2.0 A
CI-2AX-XXX-XXX-X
1.2 A
1.2 A
CI-4AX-XXX-XXX-X
0.59 A @ 230 VAC 3 Phase
0.59 A @ 230 VAC 3 Phase
CI-4AX-XXX-XXX-X
0.30 A @ 460 VAC 3 Phase
0.30 A @ 460 VAC 3 Phase
Power Connection
See Electrical Connections in instruction manual 334513
See Electrical Connections in instruction manual 334513
Environmental temperature range
–40°–176°F
-40°–80°C
Noise (dBa)
Maximum sound pressure
less than 70 dBa
less than 70 dBa
Inlet/Outlet Sizes
Fluid inlet size
1/4 in. npt(f)
1/4 in. npt(f)
Fluid outlet size
1/4 in. npt(f)
1/4 in. npt(f)
Materials of Construction
Pump/Check Valve Seal Material
See Configuration Chart in instruction manual 334513 for seal material. All other packing materials are PEEK and PTFE unless otherwise noted.
See Configuration Chart in instruction manual 334513 for seal material. All other packing materials are PEEK and PTFE unless otherwise noted.
Wetted Parts
See Configuration Chart in instruction manual 334513 for plunger material. All other materials are 316 stainless steel unless otherwise noted.
See Configuration Chart in instruction manual 334513 for plunger material. All other materials are 316 stainless steel unless otherwise noted.
Weight
Wolverine Basic
31 lb.
14 kg
Wolverine Advanced Simplex
35 lb.
16 kg
Wolverine Advanced Duplex
39 lb.
18 kg