How To Paint a Popcorn Ceiling Using an Airless Sprayer

Painting textured ceilings with paint rollers takes time and can cause the texture to flake off from the surface. Using an airless sprayer to paint your ceilings saves you time and preserves the texture appearance while providing a more complete and uniform coverage.

WATCH: How to Spray a Vaulted Ceiling (2:48)

Suggested Tools & Equipment

• Graco, Magnum, or TrueCoat Paint Sprayer (visit Paint Sprayer category page to compare models)
• Paint
• Spray tips – a wider spray pattern for large surfaces and narrow size for smaller surfaces (see tip selector)
• Empty buckets for priming sprayer and clean up (two needed)
• Stirring sticks
• Paint strainer bag – helps prevent tip plugs and provides a better finish
• Tarps, drop cloths, or plastic sheeting
• Masking tape
• Paint brush for touch-ups
• Magnum tip extension – for hard-to-reach areas that would otherwise require a ladder
• Pressure roller kit (optional)
• Additional airless hose sections if needed
• Spray shield
• Pump Armor storage fluid or TSL fluid (see pump protectant product details)
• Cleaning rags
• Stiff nylon brushes for clean up
• Safety and protection equipment – safety glasses/goggles, dust mask/respirator, spray sock or hat to cover head

1. Move as much of the furniture out of the room as possible. Any furniture left in the room should be moved to the centre and completely covered. Make sure to have plenty of space for your tools and equipment.
2. Cover everything you don’t wish to get paint on. Use masking tape to protect any trim, and cover any walls you don’t want painted with plastic tarps or protective paper. Remove or cover light fixtures.
3. Cover everything you don’t wish to get paint on. Use masking tape to protect any trim, and cover any walls you don’t want painted with plastic tarps or protective paper. Remove or cover light fixtures.

1. Select the spray tip that’s best suited for the paint you are using and the surface to be sprayed. Be sure the tip’s hole size does not exceed the maximum capacity of your sprayer (see spray tip info).
2. If you’re using paint from multiple containers, mix it together in an empty 20 litre container to ensure consistent colour even if small colour differences exist between individual paint cans. If you are spraying the ceiling only, use paper, plastic tarps, or a spray shield to protect the walls. If you choose to use a spray shield, position it tightly at a 45-degree angle into the corner where the wall meets the ceiling surface.
3. Begin at an edge where the ceiling and wall meet. Spray along that edge from one side of the room to the other. When your first pass is complete, continue to spray repeated passes until the ceiling is covered, overlapping each pass by 50%.

1. Allow significant time for the paint to dry before removing tape from your trim. This will result in crisp, clean lines.
2. Remove all coverings from furniture and other areas.
3. Replace any lighting fixtures that you removed and move furniture or other items back into place.
4. Clean your airless paint sprayer after each use. Follow the directions in your user’s manual for Power Flush cleaning with water based materials or use the bucket method of cleaning if applicable. For more information, see Power Flush Video or refer to your Sprayer Operation Manual.