Graco Inc.

温胶供胶系统 

针对温胶材料和温度调节应用

购买地点小帮手咨询信息

固瑞克温胶供胶系统专为密封胶或粘合剂等需要加热到 100°C(212°F)的应用而设计,可实现卓越的热控制,是温度调节应用的理想选择。可完美替代水套式解决方案。

  • 填补热胶与室温供胶系统间的空白
  • 模块化方案可方便地直接固定安装,不用复杂地逐点布线
  • 直观简便的界面
  • 可通过配置满足独特的应用与材料需求

Warm Melt Supply Systems
Maximum Air Input Pressure
D60
150 psi
10 bar, 1 MPa
D200
150 psi
10 bar, 1 MPa
D200s
125 psi
9 bar, 0.9 MPa
Platen Wetted Parts (By Platen Code and Part Number)
F: 257729, 5 gal (20 l)
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
L: 257734, 8 gal (30 l)
U: 257738, 16 gal (60 l)
H: 257731, 5 gal (20 l)
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
R: 257736, 8 gal (30 l)
Y: 257741, 16 gal (60 l)
8: 255662, 55 gal (200 l)
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
9: 255663, 55 gal (200 L)
EPDM, aluminum, zinc-plated carbon steel, 316 sst
EPDM, aluminum, zinc-plated carbon steel, 316 sst
Displacement Pump
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
Maximum Operating Temperature (Supply System)
158°F
70°C
Sound Data
See NXT Air Motor
See NXT Air Motor
External Power Supply Requirements
AC Power Units
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current