Graco Inc.

ProControl 1KS  Sistema di controllo portata elettronico monocomponente

Il sistema di controllo portata a ciclo chiuso elimina il materiale applicato in eccesso sulla parte, permettendo un maggior risparmio di materiale

Dove comprareRichiesta di informazioni

ProControl è un sistema di controllo portata a ciclo chiuso in grado di eliminare il materiale applicato in eccesso sulla parte, permettendo un maggior risparmio di materiale. Garantisce una portata costante e consente un miglior controllo di processo. 

Utilizzare con il dosatore multicomponente ProMix 2KS di Graco per il cambio colore integrato nelle applicazioni automatiche.

ProControl 1KS Fluid Manifold

Controllo portata monocomponente

  • Modifiche graduali rapide inferiori a 200 msec per un migliore controllo di processo
  • Mantenimento delle portate da 20 a 1.200 cc/min

Lavaggio integrato

  • La chiusura dell'aria/solvente riduce al minimo lo spreco di materiale

Moduli di cambio colore opzionali

  • Gestisce facilmente fino a 30 colori

Installazione flessibile

  • Componenti a sicurezza intrinseca
  • Compatibile con materiali a base acquosa o di solvente
  • Interfacce intuitive per comandi PLC

ProControl 1KS
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Fluids handled
one component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
4000 psi
275.8 bar, 27.58 MPa
Low pressure color change
300 psi
20.6 bar, 2.07 MPa
Coriolis Meter
2300 psi
158.6 bar, 15.86 MPa
Flow control
190 psi
13.1 bar, 1.31 MPa
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
1/4 npt(f)
Fluid Outlet Size (static mixer)
1/4 npt(f)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA