Graco Inc.

Pro Xp Waterborne Electrostatic Spray Guns  Manual Electrostatic Guns for Waterborne Applications

Ideal for high quality spraying of low or high pressure applications

販売代理店情報資料請求
Share |

Ideal for spraying waterborne materials with isolation systems, the Pro Xp waterborne gun is available in air spray, air-assist models and a unique model for spraying mold release materials.

Externally charged waterborne air spray gun reduces material and environmental costs without the expense and limitations of an electrostatic isolation system.

Pro Xp Air Spray: For low pressure spraying with an isolation system including the WB100.

Pro Xp Air-Assist: For high pressure spraying with an isolation system including the WB3000. Delivers a fine finish with an AEF or AEM tip.

Pro Xp MR: Low pressure spraying with a fine finish spray tip. Delivers fine atomized particles required for mold release applications. Connects to an isolation system, including the WB100 and sprays with an AEM or AEF spray tip.

 

 

 

  • Externally charged waterborne air spray gun reduces material and environmental costs without the expense and limitations of an electrostatic isolation system.
  • For spraying conductive, waterborne fluids – no isolation system needed
  • Waterborne material stays grounded in the gun and is charged at the tip of the electrostatic spray gun with the assistance of a probe.
  • Two probe options meet different needs. The long probe provides the best transfer efficiency and wrap. The shorter probe is for low profile electrostatic charging.
  • Smart controls help you analyze performance, adapt voltage needs and troubleshoot easily.

 

メートル法で表示. 米国単位系（インチ）で表示.

Electrostatic Air Spray Waterborne Guns
Maximum Working Fluid Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Short Circuit Current Output
125 microamperes
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M733 installed. L60T17 and L60T18: 60 kV. L60M17, L60M18, and L60M19: 30–60 kV
0.35 J with fluid hose 24M733 installed. L60T17 and L60T18: 60 kV. L60M17, L60M18, and L60M19: 30–60 kV
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A) at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A) at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A) at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in. OD tube fitting
10 mm OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Triton Pump: See manual 309303.
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Triton Pump: See manual 309303.