Manzel Model HP-50 High Pressure Lubricators

For lubricating compressor and circulator cylinder walls, heavily loaded bearings and other moving parts

Inköpsställen Begär upplysningar

Dela |

Single plunger force feed design is highly efficient for injecting lubricants and/or compatible fluids into high pressure systems. Vacuum sight feeds on self-contained pumping units show output of lubricant to individual lubrication points.

Relaterade länkar

Sign Up for Updates

Funktioner
Resurser
Tekniska data
Material
Applikationer
Branscher
Relaterade produkter

All working parts are totally enclosed and self-lubricated
Individual pumping units easily removed for service
Feed rate infinitely variable from minimum to maximum with simple hand adjustment

Bruksanvisningar

311842G HP50 and HP60 High Pressure Lubicator, Operation-Service-Parts, English (Endast på engelska)

Trycksaker

L51030EN_Manzel HP Lubricators Flyer (Endast på engelska)
340821ENEU Automatic Lubrication Equipment (ILE) [andra språk]
340185ENEU Manzel Lubrication Equipment (Endast på engelska)

Se värden i metriska enheter. Se värden i amerikanska enheter.

HP50 High Pressure Lubricators
Plunger Diameter	1/4 in 0.64 cm
HP-50 Maximum Operating Pressure	50,000 psi 3,447 bar, 344 MPa
Reservoir Capacity	9 quarts from centerline of top gauge glass to centerline of bottom gauge glass 8.5 liters from centerline of top gauge glass to centerline of bottom gauge glass
Maximum Pumping Rate based on SAE 40 oil — (approx. 4 drops)	0.008 in³ per stroke 0.133 cc per stroke
Minimum Pump Rate	0.001 in³ at max. pressure 0.017 cc at max. pressure
Reservoir Heating (optional)	Steam or Electric Steam or Electric
Lubricant Viscosity	100 to 5000 SUS 100 to 5000 SUS
Operating Temperature	-200°F to 1200°F -129°C to 649°C
Construction Materials
Reservoir and Cover	Heavily ribbed cast iron Heavily ribbed cast iron
Cylinder	Hardened alloy steel, precision-honed Hardened alloy steel, precision-honed
Plunger	Hardened alloy steel, precision-ground Hardened alloy steel, precision-ground
Valves	Poppet type, flat face, hardened and ground alloy steel Poppet type, flat face, hardened and ground alloy steel
Valve Seats	Hardened and ground alloy steel Hardened and ground alloy steel
Driveshaft	Integral crankshaft type, hardened, ground and polished alloy steel, machined from solid bar Integral crankshaft type, hardened, ground and polished alloy steel, machined from solid bar
Bearings	Bronze bushed, high load capacity, long-life, self-lubricating type Bronze bushed, high load capacity, long-life, self-lubricating type
Regulating Lever	Forged steel Forged steel

Olja

Kompressorsmörjning

Nedströms: Raffinaderier

Relaterade produkter