Graco Inc.

Dyna-Star 10:1 和 Dyna-Star 5:1 模块  液压驱动的润滑油泵

接入低压或高压液压回路,具有持久耐用、耐高压的性能

购买地点小帮手咨询信息

重型结构和采矿设备依靠洁净的润滑油冲洗关键枢轴点上的污物。 Graco 自动润滑系统可持续补充润滑油,防止昂贵的组件出现故障。

Dyna-Star 10 1 & 5 1 features
  • 有多种 60 磅(27 千克)、120 磅(54 千克)及 400 磅(181 千克)泵的长度和 60 磅(27 千克)及 90 磅(41 千克)容器可供选择,可适合所有越野设备
  • 为基于注入器或分流阀的系统提供预配置泵套件,提供最大灵活性
  • 可选 Graco 控制器、液面指示器、压力开关、随动盘和鼓盖,让您准确控制系统
  • 内置便捷压力和流量控制
  • 液压控制模块 - 所有控制装置于一体,便于设置和维护系统

 

5:1 Dynastar Pump Module
Maximum hydraulic input pressure
3500 psi
241 bar, 24 MPa
Pump wetted parts
See manual 308156
See manual 308156
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
steel, buna–n rubber
steel, buna–n rubber
Maximum delivery
66 oz/min at 3 gpm hydraulic flow rate
119 in³/min, 1952 cm³/min at 3 gpm hydraulic flow rate
Hydraulic pressure operating range
800 to 1200 psi
55 to 83 bar, 5.5 to 8 MPa
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Lubricant outlet pressure range
2500 to 3500 psi
172 to 241 bar, 17 to 24 MPa
Reservoir overflow port size
1/2 npt
1/2 npt
Reservoir fill port size
1/2 npt
1/2 npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 nps swivel
1/2 nps swivel
Grease capacity
90 lb
90 lb
Mounting holes for pump module
Six 7/16 in holes on 13 7/8 in bolt circle
Six 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
37 3/4 in
959 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound pressure (Reading taken with pump operating at 66 cycles per minute. Measured per CAGI–PNEUROP, 1971)
77 dB (A)
77 dB (A)

10:1 Dyna-Star Pump Module
Maximum hydraulic input pressure
3500 psi
240 bar, 24.0 MPa
Pump wetted parts
See manual 312350
See manual 312350
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
Steel, buna-n rubber
Steel, buna-n rubber
Maximum delivery @ 60 cpm
1.1 lb/min, 34.8 in³/min
570 cm³/min
Regulated hydraulic pressure operating range
Models: 247444, 247574, 247456, 247457, 247970: 250 to 350 psi, Models: 247706, 247707: 250 to 450 psi
Models: 247444, 247574, 247456, 247457, 247970: 1.7 to 2.4 MPa, 17.0 to 24.1 bar, Models: 247706, 247707: 1.7 to 3.1 MPa, 17.0 to 31.0 bar
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Maximum hydraulic fluid temperature
200°F
93.33°C
Lubricant outlet pressure range
Models: 247444, 247574, 247456, 247457, 247970: 2500 to 3500 psi, Models: 247706, 247707: 2500 to 4500 psi
Models: 247444, 247574, 247456, 247457, 247970: 17.0 to 24.0 MPa, 170 to 240 bar, Models: 247706, 247707: 17.0 to 31.0 MPa, 170 to 310 bar
Reservoir overflow port size
1/2 in npt
1/2 in npt
Reservoir fill port size
1/2 in npt
1/2 in npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 in nps swivel
1/2 in nps swivel
Grease capacity
Model 247444, 247707: 90 lb, Model 247574, 247706: 60 lb
Model 247444, 247707: 41 kg, Model 247574, 247706: 27 kg
Mounting holes for pump module
six, 7/16 in holes on 13 7/8 in bolt circle
six, 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
Model 247444, 247707: 42.75 in, Model 247574, 247706: 35.15 in
Model 247444, 247707: 1086 mm, Model 247574, 247706: 893 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound Pressure (reading taken with pump operating at 66 cycles per minute. Sound pressure measured per CAGI-PNEUROP, 1971)
77 dB(A)
77 dB(A)