- Precision, on-ratio dispense reduces material waste for a better bottom line
- More technology for less money
- Fully configurable
- Stores 100 shot sizes and five sequences of 20 positions each
- Compact footprint saves space in your plant
- Intuitive, easy-to-use controls simplify training
- Integrated USB lets you download process data onto a flash drive for further analysis
HFR Metering System Hydraulic Fixed Ratio Metering System
Versatile two-component precision dispense system
Engineered for versatility, the Graco HFR Metering System packs advanced technologies and precision dispensing into one compact, affordable system.
With its accuracy and repeatability, the Graco HFR lets you hit a specific ratio and volume – the first time, and every time. You reduce scrap and rework with accurate, on-ratio dispensing.
The Graco HFR Metering System is one of the first modular, configurable systems in the polyurethane processing equipment marketplace. While other systems are custom designed for specific applications, the Graco HFR Metering System is modular and offers more technology for a lower capital investment than traditional custom RIM equipment.
Configure the components essential for your application
- Select what you need for your material and application – no more, no less
- Faster lead times – configured equipment solutions are delivered to your door faster than a custom engineered solution
- Easier maintenance with standard parts
- Service is there when you need it through Graco's global distribution network
Graco HFR technology succeeds the former Reactor IP, which has been discontinued.

Příručky
- 313997ZAU, Manual, HFR, Setup-Operation, English [další jazyky]
- 313998ZAA, Manual, HFR, Hydraulic, Fixed-Ratio Proportioner, Repair-Parts, English [další jazyky]
- 3A0235H - Feed Supply Pump Kits, Instructions-Parts, English [další jazyky]
- 3A0019W, Manual, Z-Series Chemical Pump, Instructions-Parts, English [další jazyky]
- 3A0020B, HFR Hydraulic Actuator, 258771, Repair-Parts, US English [další jazyky]
- 3A0021D - Vertical Hydraulic Driver, Instructions-Parts, English (Pouze anglicky)
- 3A0238V, Manual, AC Hydraulic Power Pack Module, Instructions-Parts, English [další jazyky]
- 3A0395V, Stainless Steel Tank Stands Instructions-Parts, English [další jazyky]
- 3A0239F - Power Distribution Module, Instructions - Parts, English [další jazyky]
- 3A1149J, Manual, HFR Discrete Gateway Module Kits, Instructions, English [další jazyky]
- 3A0237P - Heated Hoses and Applicator Kits, Instructions-Parts, English [další jazyky]
- 3A1704P, Manual, Communications Gateway Module Installation Kit, Instructions-Parts, English [další jazyky]
- 3A2806D, Level Detection Module and Drum Feed Kit, Instructions - Parts, English (Pouze anglicky)
- 199346N, GMS HFR Proportioner, EU-Declaration of Conformity (Pouze anglicky)
313998ZAA, Manual, HFR, Hydraulic, Fixed-Ratio Proportioner, Repair-Parts, English
Dokumenty
- 340334ENEU, HFR Metering System [další jazyky]
- 348782ENEU, HFR Metering Packages [další jazyky]
- 340522ENEU, Wind Energy Lubrication Solutions (Pouze anglicky)
- 340462EN-B, Advanced Composites Brochure (Pouze anglicky)
- 339934ENEU, Glass Industry [další jazyky]
- 340666EN, Case Study - Polyurethane Insulation Panels for Metal Detection Equipment (Pouze anglicky)
- 340669EN, Case Study - Epoxy Resin for Aluminum Assembly (Pouze anglicky)
- 340674EN, Case Study - Laminating Urethane for Flexible Packaging (Pouze anglicky)
- 340670EN, Case Study - Rigid Foam for Store Displays (Pouze anglicky)
- 348583EN, Case Study - Silicone Sealant for Solar Frame Attachment (Pouze anglicky)
- 340667EN, Case Study - Urethane Foam for Insulated Piping (Pouze anglicky)
- 340665EN, Case Study - Rigid Foam for Injection Molded Parts (Pouze anglicky)
Další zdroje
HFR | |
Honda GX 200 Engine | |
ANSI Power Rating @ 3600 rpm |
6.5 Horsepower
4.8 kW
|
Maximum Working Pressure | |
Base Coat Pump |
1000 psi
69 bar, 6.9 MPa
|
Top Coat Pump |
3300 psi
228 bar, 22.8 MPa
|
Noise Level | |
Sound Power |
105 dBa per ISO 3744
105 dBa per ISO 3744
|
Sound Pressure |
96 dBa measured at 3.1 ft
96 dBa measured at 1 m
|
Maximum Delivery Rating | |
Base Coat Pump |
3.0 gpm
11.36 liter/min
|
Top Coat Pump |
2.20 gpm
8.33 liter/min
|
Maximum Tip Size | |
Base Coat Pump |
1 applicator with .071 in. tip
1 applicator with 10 mm Nozzle
|
Top Coat Pump |
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
|
Inlet Paint Strainer | |
Base Coat Pump |
2 in. npsm, #5 mech sst
2 in. npsm, #5 mech sst
|
Top Coat Pump |
1 in. npsm, #8 mesh sst
1 in. npsm, #8 mesh sst
|
Pump Inlet Size | |
Base Coat Pump |
2 in. QD Camlock male coupler
2 in. QD Camlock male coupler
|
Top Coat Pump |
1 in. – 11.5 npsm
1 in. – 11.5 npsm
|
Fluid Outlet Size | |
Base Coat Pump |
1 in. QD Camlock male coupler
1 in. QD Camlock male coupler
|
Top Coat Pump |
3/8 npsm
3/8 npsm
|
Wetted Parts | |
Wetted Parts |
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating
|
HFR | |
Maximum Fluid Working Pressure |
3000 psi
207 bar, 20.7 MPa
|
Maximum Fluid Temperature |
190°F
88°C
|
Fluid Inlet Feed Pressure Range |
50 psi to 250 psi
3.5 bar, 0.35 MPa to 17.5 bar, 1.75 MPa
|
Fluid Inlets | |
Component A (Red) |
1/2 npt(f)
1/2 npt(f)
|
Component B (Blue) |
3/4 npt(f)
3/4 npt(f)
|
Fluid Outlets | |
Component A (Red) |
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
|
Component B (Blue) |
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
|
Fluid Circulation Ports |
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing, 17.5 bar, 1.75 MPa maximum
|
Line Voltage Requirement |
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
|
Amperage Requirement |
See Models in instruction manual 313997
See Models in instruction manual 313997
|
Sound Power |
93 dB
93 dB
|
Heater Power | |
A (Red) and B (Blue) heaters total, no hose, Heated HFR Models only |
12kW
12kW
|
Hydraulic reservoir capacity |
9 gal
34 liters
|
Recommended hydraulic fluid |
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
|
Weight | |
Units with 12 kW Heaters |
868 lb
394 kg
|
Units without heaters |
634 lb
288 kg
|
Wettet Parts |
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
|
All other brand names or marks are used for identification purposes and are trademarks of their respective owners. |
-
Materiály na korby nákladních automobilů
-
Zasklívání
Zařízení pro vytváření sekundárního utěsnění izolačního skla.
-
Foamed-in-Place Gasketing
Equipment to create liquid gasketing from beads of two-component silicone or polyurethane
-
Filters
Adhesive handling equipment for bonding filter elements into assemblies
-
Reaction Injection Molding (RIM)
Equipment that injects materials into a fixed mold
-
Čalounění a montáž automobilů
-
Zpracování polyuretanu do automobilů
-
Automobilové kompozity
-
Wind Power - Blades
Adhesive and resin dispensing equipment for blade manufacturing
-
Výroba a povrchová úprava nábytku
-
Výroba spotřebičů
-
Architektonické úpravy a tvarování
-
Sportovní vybavení
-
Letectví a kosmonautika – kompozity
Přesné dávkovací systémy pro procesy laminování a lisování