ProMix 2KE 프로포셔너 소형 기본형 복수 성분 프로포셔너

모든 분사 기술에 대하여 펌프 및 계량기 기반 시스템으로 제공되는 소형 기본형 프로포셔너

구매처 정보 요청

공유 |

모든 분사 기술에 대하여 펌프 및 계량기 기반 시스템으로 제공되는ProMix 2KE는 복수 성분 마감이 용이. 다중 색상, 2액 성분, 부스 내 작업에 적합.

Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.

매뉴얼

자료

344876EN ProMix 2KE Entry Level Proportioner [기타 언어]
345099EN-F Acid Catalyst for ProMix Proportioners (영어만 해당)

기타 자원

ProMix 2KE FAQ's
CAD Drawing (2D) - 24F080 - .zip (영어만 해당)
ProMix ROI
ProMix Selector

측정 단위로 값 보기. 미국 달러로 가격 보기.

ProMix 2KE Meter-Based System
Maximum fluid working pressure	3000 psi 275.8 bar, 27.58 MPa
Maximum working air pressure	100 psi 7.0 bar, 0.7 MPa
Air supply	75–100 psi 5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size	3/8 npt(f) 3/8 npt(f)
Air filtration for air logic (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air 5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air 30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1–30.0:1 0.1:1–30.0:1
On-ratio accuracy	up to +/- 1%, user selectable up to +/- 1%, user selectable
Fluids handled	one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
Fluid inlet sizes	1/4 npt(f) 1/4 npt(f)
Fluid outlet size (static mixer)	1/4 npt(f) 1/4 npt(f)
External power supply requirements	85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge 85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range	41–122°F 5–50°C
Approximate Weight	200 lb 91 kg
Environmental conditions rating	indoor use, pollution degree (2), installation category II indoor use, pollution degree (2), installation category II
Wetted parts	303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE 303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Fluid Flow Rate Range
G3000, G250 Meter	0.02–1.00 gpm 75–3800 cc/min
G3000HR, G250HR Meter	0.01–0.50 gpm 38–1900 cc/min
Coriolis Meter	0.005–1.00 gpm 20–3800 cc/min
S3000 Solvent Meter (accessory)	0.01–0.50 gpm 38–1900 cc/min
Noise Level
Sound pressure level	below 70 dBA below 70 dBA
Sound power level	below 85 dBA below 85 dBA

ProMix 2KE
Maximum fluid working pressure	See Manual 3A0868. See Manual 3A0868.
Maximum working air pressure	100 psi 0.7 MPa, 7 bar
Air supply	75 to 100 psi 0.5 to 0.7 MPa, 5.2 to 7 bar
Air filter inlet size	3/8 npt(f) 3/8 npt(f)
Air filtration for air logic (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air 5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air 30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1 to 30:1 0.1:1 to 30:1
Viscosity range of fluid	20 to 5000 cps 20 to 5000 cps
Fluid filtration (user-supplied)	100 mesh minimum 100 mesh minimum
Fluid outlet size (static mixer)	1/4 npt(f) 1/4 npt(f)
External power supply requirements	85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge 85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Operating temperature range	41° to 122°F 5° to 50°C
Approximate weight	300 lb 136 kg
Environmental conditions rating	indoor use, pollution degree (2), installation category II indoor use, pollution degree (2), installation category II
Fluids handled	one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
On-ratio accuracy
1:1 to 10:1 Mixing Ratio	± 2% ± 2%
10.1:1 to 30:1 Mixing Ratio	± 5% ± 5%
Noise level
Sound pressure level	below 70 dBA below 70 dBA
Sound power level	Below 85 dBA Below 85 dBA
Materials of construction
Wetted materials on all models	303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE 303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE

ProMix 2KE Pump-Based System
Maximum fluid working pressure	See the ProMix 2KE manual. See the ProMix 2KE manual.
Maximum working air pressure	100 psi 7.0 bar, 0.7 MPa
Air supply	75–100 psi 5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size	3/8 npt(f) 3/8 npt(f)
Air filtration for air logic (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air 5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air 30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1–30:1 0.1:1–30:1
On-ratio accuracy	1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5% 1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
Fluids handled	one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid	20–5000 cps 20–5000 cps
Fluid filtration (user-supplied)	100 mesh minimum 100 mesh minimum
Fluid outlet size (static mixer)	1/4 npt(f) 1/4 npt(f)
External power supply requirements	85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge 85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range	41–122°F 5–50°C
Approximate Weight	300 lb 136 kg
Environmental conditions rating	indoor use, pollution degree (2), installation category II indoor use, pollution degree (2), installation category II
Wetted parts	303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE 303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Noise Level
Sound pressure level	below 70 dBA below 70 dBA
Sound power level	below 85 dBA below 85 dBA

ProMix® 2KE
Maximum fluid working pressure	See Hazardous Location Models in manual 3A0870 See Hazardous Location Models in manual 3A0870
Maximum working air pressure	100 psi 7 bar , 0.7 MPa
Air supply	75 - 100 psi 5.2 - 7 bar, 0.5 - 0.7 MPa
Air filter inlet size	3/8 npt(f) 3/8 npt(f)
Air filtration for air logic (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air 5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air 30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1- 30:1 0.1:1- 30:1
On-ratio accuracy	up to ±1%, user selectable up to ±1%, user selectable
Fluids handled
one or two component:	solvent and waterborne paints solvent and waterborne paints
polyurethanes
epoxies
acid catalyzed varnishes
moisture sensitive isocyanates
Viscosity range of fluid	20- 5000 cps 20- 5000 cps
Fluid filtration (user-supplied)	100 mesh minimum 100 mesh minimum
Fluid flow rate range
G3000, G250 Meter	0.02-1.00 gal/min 75 - 3800 cc/min.
G3000HR, G250HR Meter	0.01-0.50 gal/min 38 - 1900 cc/min.
Coriolis Meter	0.005-1.00 gal/min 20 - 3800 cc/min.
S3000 Solvent Meter (accessory)	0.01-0.50 gal/min 38 - 1900 cc/min.
Fluid inlet sizes
Flow Meter	1/4 npt(f) 1/4 npt(f)
Dose Valve/Color Valve Adapters	1/4 npt(f) 1/4 npt(f)
Fluid outlet size (static mixer)	1/4 npt(f) 1/4 npt(f)
External Power Supply Requirements
	85 15 amp maximum circuit breaker required- 85 15 amp maximum circuit breaker required-
	250 Vac, 50/60 Hz, 2 amps maximum draw 250 Vac, 50/60 Hz, 2 amps maximum draw
8 to 14 AWG power supply wire gauge
Operating temperature range	41- 122° F 5-50° C
Approximate Weight
Meter Systems	200 lb 91 kg
Pump Systems	300 lb 136 kg
Environmental Conditions Rating	indoor use, pollution degree (2), installation category II indoor use, pollution degree (2), installation category II
Noise Level
Sound pressure level	below 70 dBA below 70 dBA
Sound power level	below 85 dBA below 85 dBA
Wetted parts	303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE 303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE

ProMix 2KE 프로포셔너 소형 기본형 복수 성분 프로포셔너

모든 분사 기술에 대하여 펌프 및 계량기 기반 시스템으로 제공되는 소형 기본형 프로포셔너

관련 링크

매뉴얼

3A1664L, 안내서, ProMix 2KE 펌프 기반의 다중 성분 혼합기, 작동, 한국의

3A1674N, 안내서, ProMix 2KE, 계량기 기반의 다중 성분 혼합기, 작동, 한국의

3A1684T, 안내서, ProMix 2KE 복형 성분 이액형 장비, 수리/부품, 한국의

312781H, Manual, Fluid Mix Manifold Instructions-Parts, English

406713B, Dispense Valve Acid Kit, Instructions-Parts, English

자료

344876EN ProMix 2KE Entry Level Proportioner

기타 자원

부속품

관련 제품