Air/Oil AO Series Valves Series Progressive Monitoring Systems
Detects air line or oil line faults in your system
A Graco exclusive design! The Air Oil solution that detects air line or oil line faults in your
system. Series progressive monitoring ensures your critical bearings are lubricated properly.
- Convenient manifold design mounts directly to the face of standard Graco series progressive divider valve assembly
- Check valve design prevents oil from being forced into the air system if lube lines get crushed or bearings get blocked
- Air combines with the oil after the fluid outlet check, preventing air from backing up into your source oil system
- Complete kits include manifold, air sensor, and check valves for easy installation
Manuale
Documentaţie
Air Over Oil Manifold Assembly | |
U.S.
Metric
|
|
Maximum Air Working Pressure |
250 psi
1.7 MPa, 17 bar
|
Maximum Fluid Working Pressure |
250 psi
1.7 MPa, 17 bar
|
Lubricant |
Oils up to ISO 460
2500 sus
|
Air Inlet |
1/8 NPT female
1/8 NPT female
|
Maximum Operating Temperature |
200° F
93° C)
|
Material |
anodized aluminum, zinc plated steel, stainless steel, chrome alloy steel, fluorocarbon
anodized aluminum, zinc plated steel, stainless steel, chrome alloy steel, fluorocarbon
|
Air Sensor | |
Air Connection |
1/8 NPT male
1/8 NPT male
|
Electrical Connection |
DIN43650A, PIN 1 - COM, PIN 2 - Not used, PIN3 - Normally Open
DIN43650A, PIN 1 - COM, PIN 2 - Not used, PIN3 - Normally Open
|
Maximum Pressure |
250 psi
1.7 MPa, 17 bar
|
Fixed Setpoint |
35 psi
.24 MPa, 2.4 bar
|
Setpoint Direction |
Falling
Falling
|
Circuit Form |
SPST-NO (below 35 psi)
SPST-NO (below 35 psi)
|
Current Rating |
5A @ 250 VAC. 5A @ 30 VDC (resistive)
5A @ 250 VAC. 5A @ 30 VDC (resistive)
|
Diaphragm Material |
Buna-N
Buna-N
|