- Simple icon- and men-based user interface is easy to setup and operate, saving valuable technican time
- Special operation modes save setup and inspection time
- Rugged and waterproof
- Works with single line resistive, single line parallel, series progressive and dual line systems
GLC 4400 Controller Multi-purpose controller for automatic lubrication systems
Easily manage your automatic lubrication system
GLC 4400 gives you programmed lubrication cycles for optimal machine performance. Customize your lubrication time, pressure, cycle counts and machine counts for maximum precision and productivity.

Navodila za uporabo
Literatura
GLC 4400 Lubrication Controller | |
Input Contact | |
Power Source DC - model 24B591 |
9 - 30 VDC
9 - 30 VDC
|
Power Source AC - model 24B596 |
100 VAC to 240 VAC - 50/60 Hz
100 VAC to 240 VAC - 50/60 Hz
|
Power consumption |
24 Watts
24 Watts
|
Cycle Pressure Control Input (optional) |
Normally open pressure or cycle switch
Normally open pressure or cycle switch
|
Machine Count Control Input (optional) |
Machine count control switch
Machine count control switch
|
Lubrication level (optional) |
Normally open level switch, closes upon low level
Normally open level switch, closes upon low level
|
Remote Manual Run Input |
Normally open remote manual run switch
Normally open remote manual run switch
|
Outputs | |
Pump Control Voltage |
Minimum Switching Capacity
Minimum Switching Capacity
|
Pump Control Max Switching Voltage |
250 VAC, 100 VDC
250 VAC, 100 VDC
|
Pump Control Max Switching Voltage |
10 A (AC), 5A (DC)
10 A (AC), 5A (DC)
|
Pump Control Minimum Switching Capacity |
100 mA @ 5 VDC
100 mA @ 5 VDC
|
Low Level Alarm Voltage |
Power Source
Power Source
|
Low Level Alarm Max Switching Voltage |
250 VAC, 30 VDC
250 VAC, 30 VDC
|
Low Level Alarm Max Switching Current |
5A (AC), 5A (DC)
5A (AC), 5A (DC)
|
Low Level Alarm Minimum Switching Capacity |
100 mA @ 5 VDC
100 mA @ 5 VDC
|
Auxiliary Alarm Voltage |
Power Source
Power Source
|
Auxiliary Alarm Max Switching Voltage |
250 VAC, 30 VDC
250 VAC, 30 VDC
|
Auxiliary Alarm Max Switching Current |
5A (AC), 5A (DC)
5A (AC), 5A (DC)
|
Auxiliary Alarm Minimum Switching Capacity |
100 mA @5 VDC
100 mA @5 VDC
|
Status OK Voltage |
Power Source
Power Source
|
Status OK Max Switching Voltage |
250 VAC, 100 VDC
250 VAC, 100 VDC
|
Status OK Max Switching Current |
10 A (AC), 5A (DC)
10 A (AC), 5A (DC)
|
Status OK Minimum Switching Capacity |
100 mA @ 5 VDC
100 mA @ 5 VDC
|
Protection grade |
IP69K
IP69K
|
Enclosure Material |
Fiberglass reinforced polyester
Fiberglass reinforced polyester
|
Membrane Material |
Polyester
Polyester
|
Bushing |
Ethylene Propylene Diene Monemer Rubber (EDPM)
Ethylene Propylene Diene Monemer Rubber (EDPM)
|
Operating temperature range |
- 40°F to 145°F
- 40°C to 63°C
|
Storage Temperature |
- 13°F to 145°F
- 25°C to 63°C
|
Povezani izdelki
-
Electric Dyna-Star (EDS)
Electric pumps for heavy duty automatic lubrication and transfer systems.
-
G1 Standard
Reliable entry level lubrication pump
-
G3 Standard
Works with your PLC
-
GLC 2200 Controller
-
Hydraulic Dyna-Star
Long-lasting, high pressure performance by tapping into low or high pressure hydraulic circuits
-
Pneumatic Dyna-Star/Fire-Ball 300 Module
For Off-Road Mobile Lubrication