ProMix 3KS-Dosierer Elektrische Mehrkomponenten-Dosiersysteme
Zusammen mit einem ProMix 2KS-System erwerben oder vorhandenes 2KS-System aufrüsten
Gracos Zwei- und Dreikomponenten-Dosierer bieten präzise und zuverlässige elektrische Mehrkomponenten-Dosierer für eine Vielzahl von lösungsmittel- und wasserbasierenden sowie säurekatalysierten Materialien. Von Anwendungen für Einsteiger bis hin zu Profianwendungen, die ProMix 2KS und 3KS-Systeme bieten Flexibilität und höhere Effizienz.
- Bietet maximale Genauigkeit beim Mischungsverhältnis
- Liefert Rückmeldung zu kritischen Verfahrensvariablen
- Eingebaute Systemsicherungen
- Effektive Lösung für den Farbwechsel
- Effiziente Materialerfassung und -nachverfolgung
Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.
- Manual and automatic configurations
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Single- or multi-color and catalysts
- Accurate ratio assurance for superior finish quality
- Simple programming allows fast set up and efficient process control
- Advanced web interface provides consolidated system management and reporting
Handbücher
- 313882F, Manual, ProMix 3KS Operation for Manual Systems, English [andere sprachen]
- 313885F, ProMix 3KS Operation Manual, for Automatic Systems, English [andere sprachen]
- 313883C, ProMix 3KS Repair-Parts Manual, US English [andere sprachen]
- 313881B, ProMix 3KS Installation Manual, for Manual and Automatic Systems, Installation, English [andere sprachen]
- 3A0433F, Handbuch, ProMix® 2KS/3KS-Web- Interfaces, Software-Anleitung, German [andere sprachen]
- 3A2107H, Handbuch, Pistolenspülbox-Einbausatz, Anleitung – Teile, German [andere sprachen]
- 3A2106H, Handbuch,Materialmischverteiler, Anleitung/Teile, Deutsch [andere sprachen]
- 3A2109H, Handbuch, Farbwechselmodul- Bausätze, Anleitung & Teilel, Deutsch [andere sprachen]
- 406719B, 15T632 Air Flow Switch Kit, Instructions, English (nur in Englisch)
- 407088B, Instruction Form for Injection Kit 15U955, German [andere sprachen]
- 3A2312H, Bausätze für Ablassventil und drittes Spülventil, Anleitung & Teile, German [andere sprachen]
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (nur in Englisch)
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (nur in Englisch)
- 406804C, Instruction Form for Integrator Kit 24B618 (100cc) English (nur in Englisch)
- 3A5420B, 15V077 Ausgabeventil, Säurekit, Sätze - Anleitung/Teile, Deutsch [andere sprachen]
- 407087B, 15V825 Discrete I/O Board Kit, Instructions/Parts, German [andere sprachen]
- 3A2082J, Luft dispensventil, Anleitung - Teile, Deutsch [andere sprachen]
- 3A2083E - Color and Catalyst Change Valves Instruction Manual, German [andere sprachen]
- 3A2083E - Color and Catalyst Change Valves Instruction Manual, German [andere sprachen]
- 3A2108C, Network Communication Kits Instruction-Parts Manual, German [andere sprachen]
- 3A2087A - 15V950 Floor Stand, Instructions-Parts, German [andere sprachen]
- 3A2086B, Manual, Pistolenspülbox-Einbausatz 15V534, Anleitung und Teile, German [andere sprachen]
- 333260F, Handbuch, Alarmleuchtensäule, German [andere sprachen]
- 199266S, ProMix 1KS, 2KS, 3KS, and Accessories, EU-Declaration of Conformity (nur in Englisch)
- 199310D, Module, Gateway Communication & AWI, ProMix 2KS and 3KS , Informer Power Supply, 318-162 EC-Declaration of Conformity (European Community) English (nur in Englisch)
313885F, ProMix 3KS Operation Manual, for Automatic Systems, English
313881B, ProMix 3KS Installation Manual, for Manual and Automatic Systems, Installation, English
3A0433F, Handbuch, ProMix® 2KS/3KS-Web- Interfaces, Software-Anleitung, German
3A2109H, Handbuch, Farbwechselmodul- Bausätze, Anleitung & Teilel, Deutsch
407088B, Instruction Form for Injection Kit 15U955, German
3A2312H, Bausätze für Ablassventil und drittes Spülventil, Anleitung & Teile, German
3A5420B, 15V077 Ausgabeventil, Säurekit, Sätze - Anleitung/Teile, Deutsch
407087B, 15V825 Discrete I/O Board Kit, Instructions/Parts, German
3A2108C, Network Communication Kits Instruction-Parts Manual, German
3A2087A - 15V950 Floor Stand, Instructions-Parts, German
333260F, Handbuch, Alarmleuchtensäule, German
Literatur
- 339996DE ProMix™ 2KS Elektronisches Zweikomponenten-Dosiersystem [andere sprachen]
- 344807DE ProMix 3KS [andere sprachen]
- 345099EN-F Acid Catalyst for ProMix Proportioners (nur in Englisch)
- 345101EN Finishing Automation Equipment Overview [andere sprachen]
- 344880DE ProControl™ 1KS [andere sprachen]
- Viscosity Control with ProMix 3KS (nur in Englisch)
- 3KS CARC Application (nur in Englisch)
- 2KS Waterborne Urethane (nur in Englisch)
339996DE ProMix™ 2KS Elektronisches Zweikomponenten-Dosiersystem
344807DE ProMix 3KS
345101EN Finishing Automation Equipment Overview
Andere Ressourcen
ProMix 3KS Manual System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
3000 psi
210 bar, 21 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
3KS Fluid Station |
1/4 npt(m)
1/4 npt(m)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
ProMix 3KS Automatic System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
3000 psi
210 bar, 21 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
3KS Fluid Station |
1/4 npt(m)
1/4 npt(m)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
-
Landwirtschaftliches Gerät - Herstellung
-
Farbmischraum
-
Spritzkabinen
-
CARC
-
Fahrzeugelektronik
-
Haushaltselektronik
-
Elektronikfertigung
-
Oberflächenbehandlung/Herstellung von Möbeln
-
Oberflächenbehandlung/Herstellung von allgemeinem Metall
-
Architektonische Trimmung und Formgebung
-
Eisenbahnen
-
Lastkraftwagen
-
Fuhrparks
-
Luft- und Raumfahrt - Oberflächenbehandlung
-
Holz und Holzprodukte
-
Schweres Gerät - Herstellung
Zubehör
-
Erweiterte Webschnittstelle
Automatisiertes Bestandsverwaltungssystem für ProMix 2KS-Dosierer
-
Farbwechselventile
Nieder- und Hochdruckventile für eine Vielzahl von lösungsmittel- und wasserbasierenden sowie hochf...
-
Volumenzähler
Eine Vielzahl von Getriebe- und Massenvolumenzählern für Anwendungen der Oberflächenbehandlung
Verwandte Produkte
-
ProControl 1KE
Sowohl Material- als auch Luftdruck bewältigen, um präzise Spritzparameter zu verriegeln, und Spritzlei...
-
ProMix 2KE-Dosierer
Kompakte Dosierer der Einsteigerklasse sind für alle Spritztechnologien in den Optionen Pumpen ode...
-
ProMix 2KS-Dosierer
Elektrische Dosierer für eine Vielzahl von lösungsmittel- und wasserbasierenden sowie säurekatalys...
-
ProMix PD2K-Dosierer
100 % Verdrängertechnologie für präzise Mischverhältnisse und gleichbleibende Leistung