Graco Inc.

VPM Metering System  For dispensing high-viscosity materials

Variable paste machine handles high-viscosity tooling pastes or adhesives

Gdje kupitiZatražite informacije
Graco VPM Metering System

Expand your capacity with this high-volume dispensing solution

The Graco VPM Metering System is a hydraulic variable metering system that uses positive displacement pumps to dispense high-viscosity materials such as tooling pastes and adhesives.

  • High flow rates – up to 55 lb (25 kg) per minute @ 70°F (21°C)
  • Ratio accuracies better than +/- 2%
  • Variable ratio allows you to change ratios on the fly
  • Ratio range: 1:1 to 5:1
  • Intuitive, easy-to-use controls simplify training
  • Integrated USB lets you download process data onto a flash drive for further analysis

VPM Metering System Secondary

Intuitive user controls

  • Easy to use
  • Less training time required
  • Programmable shot sizes and sequencing – up to 100 different shot sizes and five sequences of 20 positions each
  • Immediate access to error/event history
  • Material usage and pump cycle counter
  • USB interface

VPM
Air Inlet Pressure
85–100 psi
5.9–6.9 bar, 0.59–0.69 MPa
Wetted Parts
Stainless steel, UHMW, carbon steel
Stainless steel, UHMW, carbon steel
Fluid Viscosity Range
Paste
Paste
Fluid Flow Range
VPM-25
26-55 lb/min)
12-25 kg/min
VPM-12
22-26 lb/min)
10-12 kg/min
Hydraulic Reservoir Capacity
8 gal
30 l
Recommended Hydraulic Fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Height
VPM-25: Lowered Position
9 ft 3 in
2.82 m
VPM-25: Raised Position
11 ft 4 in
3.45 m
VPM-12: Lowered Position
9 ft 3 in
2.82 m
VPM-12: Raised Position
11 ft 4 in
3.45 m
Width
VPM-25
7 ft 8 in
2.34 m
VPM-12
7 ft 8 in
2.34 m
Depth
VPM-25
15 ft 10 in
4.83 m
VPM-12
6 ft 1 in
1.86 m