Graco Inc.

Pistola de Picar RS  Modifique as lâminas em apenas segundos

Pistola de picar inovadora para produção composta

Onde comprarSolicitar informações

Aumente o tempo FRP e mantenha a produção ativa

Com a nova Pistola de Picar RS da Graco, os funcionários podem trocar os únicos cartuchos da lâmina que não cortam em questão de segundos – comparados com os 15 minutos dos designs tradicionais de cortadores. Além disso, as lâminas e bigornas podem ser modificadas na linha de produção, resultando em um maior tempo ativo para a sua operação de plásticos reforçados de fibra de vidro.

O seu design leve é até 44% mais leve do que o da concorrência para um melhor controle de pulverização A Pistola de Picar RS da Graco oferece um padrão de pulverização superior, com emissões de VOC reduzidas também.

Graco has designed a gun specifically to spray fiberglass reinforced plastics (FRP) that is reliable, lightweight and is easy to maintain.

The RS chop gun or “chopper gun” uses a mounted fiberglass cutter, that makes sure you add cut pieces of fiberglass into the catalyzed resin stream for added strength and stability.

 

Graco has designed a gun specifically to spray fiberglass reinforced plastics (FRP) that is reliable, lightweight and is easy to maintain.

The RS chop gun or “chopper gun” uses a mounted fiberglass cutter, that makes sure you add cut pieces of fiberglass into the catalyzed resin stream for added strength and stability.

 

frp-tool

Quick blade changes

The fiberglass chopper gun standardly uses a magnetic cutter drum, which uses a magnet in the cutter head which holds the blades in place. This makes blade changes quick and easy

But Graco now also offers the option to use blade cartridges in stead of he magnetic drum.

Cartridges add convenience and speed to the production line. Blades can be switched in under a minute, right on the production line. No more stopping production to switch guns. No more taking the gun to the workbench. Instead, blades can be quickly switched on the production line.

Blade cartridges are available in 4,6 and 8 blades

 

RS Chopper Gun

Lightweight design

Its lightweight design allows for a better spraying control. The Graco RS Chop Gun delivers a superior spray pattern, with reduced VOC- emissions (Volatile Organic Compounds) as well.

See Our Equipment
in Action

Increase FRP uptime and keep production moving

With the new Graco RS Chop Gun, workers can change the unique "no-cut" blade cartridges in a matter of seconds – compared to 15 minutes with traditional cutter designs. In addition, blades and anvils can be changed right on the production line, resulting in more uptime for your fiberglass reinforced plastics operation.

Its lightweight design is up to 44% lighter than the competition for better spraying control. The Graco RS Chop Gun delivers a superior spray pattern, with reduced VOC emissions as well.

Graco has designed a gun specifically to spray fiberglass reinforced plastics (FRP) that is reliable, lightweight and is easy to maintain.

The RS chop gun or “chopper gun” uses a mounted fiberglass cutter, that makes sure you add cut pieces of fiberglass into the catalyzed resin stream for added strength and stability.

 

Graco RS Chop Gun
  • Os cartuchos de lâminas fáceis de trocar mantêm a produção ativa
  • Os cortadores de alta produtividade proporcionam a produtividade que você precisa com menos strands of roving
  • Menos roving significa menos tangling, mais tempo ativo
  • Tensão de bigorna externa ajustável - sem desmontagem, sem necessidade de ferramentas
  • O controle de velocidade permite que você ajuste a produtividade de vidro no ato
  • Padrão Air Assist Containment (AAC)
  • Disponível em modelos de mistura interna e externa
RS Chop Gun more

Design de lâmina sem ferramentas

  • Sem necessidade de ferramentas – fácil de modificar as lâminas em segundos
  • Habilidade de modificar as lâminas na linha de produção resultando em um maior tempo ativo
  • Operadores nunca precisam tocar uma lâmina
  • Praticamente elimina talhos e cortes

RS Gun and Cutter
Maximum Fluid Working Pressure
Internal Mix
258853
2000 psi
138 bar,14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
External Mix
258840
3000 psi
207 bar, 21 MPa
258852
3000 psi
207 bar, 21 MPa
258970
3000 psi
207 bar, 21 MPa,
Maximum Catalyst Working Pressure
258853
2000 psi
138 bar, 14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
258840
200 psi
14 bar, 1.4 MPa
258852
200 psi
14 bar, 1.4 MPa
258970
200 psi
14 bar, 1.4 MPa
Air Inlet Working Pressure
258853
0–125 psi
0–8.6 bar, 0–0.86 MPa
258854
0–125 psi
0–8.6 bar, 0–0.86 MPa
258971
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
258840
0–125 psi
0–8.6 bar, 0–0.86 MPa
258852
0–125 psi
0–8.6 bar, 0–0.86 MPa
258970
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
24E512
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
Maximum Fluid Temperature
258853
100°F
38°C
258854
100°F
38°C
258971
100°F
38°C
258840
100°F
38°C
258852
100°F
38°C
258970
100°F
38°C
Minimum Air Flow (at 100 psi, 7 bar, 0.7 Mpa)
258853
12.5 scfm
0.345 m³ per min.
258854
2.25 scfm
0.064 m0.345 m³ per min.
258840
2.0 scfm
0.6 m0.345 m³ per min.
24E512
16.5 scfm
16.5 m0.345 m³ per min.
Cutter Minimum Air Pressure
80 psi
550 kPa, 5.5 bar
Maximum Aiur Pressure
125 psi
9 bar, 0.9 MPa
Maximum Fluid Temperature
100°F
38°C
Cuter Maximum Glass Output *At 80 psi (550 kPa, 5.5 bar) air pressure
One Strand
3.8 lb/min
1.7 kg/min
Two Strands
6.7 lb/min
3.0 kg/min
Three Strands
8.0 lb/min
3.6 kg/min
Cuter Maximum Glass Output *At 100 psi (7 bar, 0.7 Mpa) air pressure
One Strand
4.3 lb/min
2.0 kg/min
Two Strands
7.6 lb/min
3.4 kg/min
Three Strands
9.8 lb/min
9.8 kg/min
Wetted Parts
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Materials of Construction
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Weight
258853
2.32 lb
1.05 kg
258854
2.46 lb
1.12 kg
258840
2.08 lb
0.94 kg
258852
2.33 lb
1.04 kg
24E512
2.00 lb
0.91 kg
Sound Power *Measured per ISO-3746.
258853
98.1 dB (A) at 60 psig
98.1 dB (A) at 60 psig
258854
90.6 dB(A) at 50 psig
90.6 dB(A) at 50 psig
258840
90.8 dB(A) at 50 psig
90.8 dB(A) at 50 psig
24E512
111.5 dB(A) at 100 psig and maximum speed
111.5 dB(A) at 100 psig and maximum speed
Sound Power *Measured at 3 ft (1 m) from equipment..
258853
80.3 dB (A) at 60 psig
80.3 dB (A) at 60 psig
258854
72.8 dB(A) at 50 psig
72.8 dB(A) at 50 psig
258840
73.0 dB(A) at 50 psig
73.0 dB(A) at 50 psig
24E512
93.7 dB(A) at 100 psig and maximum speed
93.7 dB(A) at 100 psig and maximum speed