Graco Inc.

1:1 Extruder 

Supply, metering and dispense system for 19-liter (5-gal) pails

Kje kupitiZahtevajte informacije

Provides ratio accuracy, production efficiency and precise material handling

The 1:1 Extruder is a fully contained proportioning and dispense system for two component materials used in concrete joint sealing, dowel bar anchoring and general product assembly.

This heavy duty extruder provides ratio accuracy, production efficiency and precise material handling. The 1:1 Extruder pays for itself in material cost savings by using bulk containers instead of cartridges.

  • Repeatability: accurately load each anchoring hole as needed to anchor your dowel bars securely and consistently
  • Ratio accuracy: mixes material precisely, conforming to material manufacturer specs and eliminating the risk of off-ratio material
  • Production efficiency: mix material as you need it, minimizing material waste and disposal hassles associated with solvent flushing
  • Precise material handling: eliminates manual mixing and the risks of inadequate working time with quick-curing materials
  • Return-on-investment: Saves material costs, by using bulk containers instead of cartridges

1:1 Extruder
Mix Ratio by Volume
1:1
1:1
Pressure Ratio (fluid/air)
22:1
22:1
Volume Output per cycle
2.9 fl. oz.
2.9 fl. oz.
Air Motor Diameter
Ø4.25
Ø4.25
Air Consumption
10 cfm
10 cfm
Air Inlet
1/2 npsm(f)
1/2 npsm(f)
Fluid Outlets
1/2 or 3/8 npt(f)
1/2 or 3/8 npt(f)
Wetted Parts
Carbon Steel, Stainless Steel, Ductile Iron, Zinc and Nickel Plating, PTFE, UHMW Polyethylene
Carbon Steel, Stainless Steel, Ductile Iron, Zinc and Nickel Plating, PTFE, UHMW Polyethylene
Maximum Air Working Pressure
90 psi
6.3 bar, .63 mPa
Maximum Temperature
Ambient
Ambient
Maximum Fluid Working Pressure
2000 psi
140 bar, 14.0 mPa)
Weight
500 lbs
227 kg