ProMix 3KS-verdelers Elektronische meercomponentendoseersystemen
Schaf dit aan samen met een ProMix 2KS-systeem of breid uw huidig 2KS-systeem uit
De twee- en driecomponentenverdelers van Graco zijn nauwkeurige en betrouwbare elektronische meercomponentenverdelers voor een brede keuze aan materiaal op oplosmiddel-, water- en zuurbasis. Zowel de instapmodellen als de opgewaardeerde toepassingen van ProMix 2KS en 3KS zorgen voor flexibiliteit en een hoger rendement.
- Zorgt voor een optimale bewaking van de mengverhouding
- Levert cruciale procesafhankelijke feedback
- Geïntegreerde systeembeveiliging
- Effectieve oplossing voor het wisselen van kleuren
- Efficiënte materiaaltracering en -rapportage
Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.
- Manual and automatic configurations
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Single- or multi-color and catalysts
- Accurate ratio assurance for superior finish quality
- Simple programming allows fast set up and efficient process control
- Advanced web interface provides consolidated system management and reporting
Handleidingen
- 313882F, Manual, ProMix 3KS Operation for Manual Systems, English [overige talen]
- 313885F, ProMix 3KS Operation Manual, for Automatic Systems, English [overige talen]
- 313883C, ProMix 3KS Repair-Parts Manual, US English [overige talen]
- 313881C, Manual, ProMix 3KS Manual Plural Component Proportioner, Installation, English [overige talen]
- 3A0435F, Handboek, ProMix® 2KS/3KS Web Interfaces, Software-instructies, Nederlands [overige talen]
- 312784H, Manual, Gun Flush Box Kit, Instructions-Parts, English [overige talen]
- 312781H, Manual, Fluid Mix Manifold Instructions-Parts, English [overige talen]
- 312787H, Manual, Color Change Module Kits, Instructions and Parts, English [overige talen]
- 406719B, 15T632 Air Flow Switch Kit, Instructions, English (Alleen Engels)
- 406715C, Instruction Form for Injection Kit 15U955, English [overige talen]
- 312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English [overige talen]
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (Alleen Engels)
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (Alleen Engels)
- 406804C, Instruction Form for Integrator Kit 24B618 (100cc) English (Alleen Engels)
- 406713B, Dispense Valve Acid Kit, Instructions-Parts, English [overige talen]
- 406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English [overige talen]
- 312782J, Air Actuated Dispense Valve Instruction-Parts Manual, English [overige talen]
- 312783E - Color and Catalyst Change Valves Instruction Manual, English [overige talen]
- 312783E - Color and Catalyst Change Valves Instruction Manual, English [overige talen]
- 3A1562D, Gateway Kits netwerkcommunicatie, Instructies-Onderdelen, Dutch [overige talen]
- 313290A - 15V950 Floor Stand, English [overige talen]
- 313212B, Manual, 15V534 Gun Flush Box Interface Kit Instructions, English [overige talen]
- 313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English [overige talen]
- 199266S, ProMix 1KS, 2KS, 3KS, and Accessories, EU-Declaration of Conformity (Alleen Engels)
- 199310D, Module, Gateway Communication & AWI, ProMix 2KS and 3KS , Informer Power Supply, 318-162 EC-Declaration of Conformity (European Community) English (Alleen Engels)
313885F, ProMix 3KS Operation Manual, for Automatic Systems, English
313881C, Manual, ProMix 3KS Manual Plural Component Proportioner, Installation, English
3A0435F, Handboek, ProMix® 2KS/3KS Web Interfaces, Software-instructies, Nederlands
312787H, Manual, Color Change Module Kits, Instructions and Parts, English
406715C, Instruction Form for Injection Kit 15U955, English
312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English
406713B, Dispense Valve Acid Kit, Instructions-Parts, English
406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English
3A1562D, Gateway Kits netwerkcommunicatie, Instructies-Onderdelen, Dutch
313290A - 15V950 Floor Stand, English
313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English
Literatuur
- 339996NL ProMix™ 2KS Elektronisch tweecomponentendoseersysteem [overige talen]
- 344807NL ProMix 3KS [overige talen]
- 345099EN-F Acid Catalyst for ProMix Proportioners (Alleen Engels)
- 345101EN Finishing Automation Equipment Overview [overige talen]
- 344880NL ProControl™ 1KS [overige talen]
- Viscosity Control with ProMix 3KS (Alleen Engels)
- 3KS CARC Application (Alleen Engels)
- 2KS Waterborne Urethane (Alleen Engels)
339996NL ProMix™ 2KS Elektronisch tweecomponentendoseersysteem
344807NL ProMix 3KS
345101EN Finishing Automation Equipment Overview
Overige middelen
ProMix 3KS Manual System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
3000 psi
210 bar, 21 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
3KS Fluid Station |
1/4 npt(m)
1/4 npt(m)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
ProMix 3KS Automatic System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
3000 psi
210 bar, 21 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
3KS Fluid Station |
1/4 npt(m)
1/4 npt(m)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
-
Landbouwapparatuur - Fabricage
-
Verfkeuken
-
Spuitcabines
-
ONDERSTEL
-
Automobielelektronica
-
Consumentenelektronica
-
Elektronicaproductie
-
Meubelafwerking/-fabricage
-
Algemene metaalafwerking/-fabricage
-
Architecturale afwerking en moldingproductie
-
Spoorwegen
-
Vrachtvervoer
-
Vloten
-
Ruimtevaart - Afwerking
-
Hout en houtproducten
-
Fabricage zware apparatuur
Toebehoren
Aanverwante producten
-
ProControl 1KE
Beheer zowel de vloeistof- als de luchtdruk om voor nauwkeurige spuitparameters te zorgen en de spuitpr...
-
ProMix 2KE-verdelers
Compacte verdeler op instapniveau in versies met pomp en meter voor alle spuittechnologieën
-
ProMix 2KS-verdelers
Elektronisch doseerapparaat voor een breed scala aan materialen op oplosmiddel-, water- en zuurbasis
-
ProMix PD2K-doseerapparaten
100% verdringertechnologie voor nauwkeurige mengverhoudingen en consistente prestaties.