WB100 Air Spray Waterborne Isolation System
The simple and reliable way to isolate waterborne coatings
The Graco WB100 is the dependable way to isolate waterborne coatings when spraying with electrostatic equipment. Ideal for spray booth systems.
- Ideal for low pressure waterborne material spraying with the Pro Xp60 WB gun for a superior finish quality and operator comfort
- Triton 1:1 150 Series pump delivers a consistent spray pattern and uniform film thickness
- Standard voltage display allows for easy monitoring of voltage for overall performance
- Simple 5 gallon (19 l) pail design is easy to color change and flush the system
- Electrostatic gun Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
- Portable cabinet increases mobility for a wide variety of applications
Navodila za uporabo
- 3A2496F, WB100 Isolation System and Pro Xp 60 WB Gun, Instructions - Parts, English [drugi jeziki]
- 309293M - Electrostatic, Waterborne, Air Spray WB100 Isolation System and Pro Xs3 Spray Gun, Instructions/Parts List, English [drugi jeziki]
- 199436D, PRO Xp 60 WB, PRO Xp 60 AA WB, WB 100, WB3000, 318-162 EC-Declaration of Conformity (European Community) English (Samo v angleščini)
3A2496F, WB100 Isolation System and Pro Xp 60 WB Gun, Instructions - Parts, English
Literatura
| WB100 Waterborne Isolation Stand | |
| Maximum Working Fluid Pressure |
100 psi
7.0 bar, 0.7 MPa
|
| Maximum Working Air Pressure |
100 psi
7.0 bar, 0.7 MPa
|
| Minimum Air Pressure at Gun Inlet |
40 psi
2.8 bar, 0.28 MPa
|
| Maximum Fluid Operating Temperature |
120°F
48°C
|
| Paint Resistivity Range |
3 megohm-cm to infinity
3 megohm-cm to infinity
|
| Short Circuit Current Output |
125 microamperes
125 microamperes
|
| Gun Air Inlet Fitting, left hand thread |
1/4 npsm(m)
1/4 npsm(m)
|
| Gun Fluid Inlet Fitting |
custom inlet for Graco waterborne fluid hose
custom inlet for Graco waterborne fluid hose
|
| Gun Weight |
27.8 oz
788 gm
|
| Gun Length |
11.1 in
28.2 cm
|
| Isolation Enclosure Air Inlet Fitting |
1/4 npt
1/4 npt
|
| Isolation Enclosure Fluid Inlet Fitting |
3/8 in OD tube
10 mm OD tube
|
| Isolation Enclosure Weight |
125 lb
56.3 kg
|
| Isolation Enclosure Height |
44 in
1118 mm
|
| Isolation Enclosure Width |
24 in
610 mm
|
| Isolation Enclosure Depth |
29 in
737 mm
|
| Voltage Output Energy | |
| With fluid hose 246431 installed |
0.35 J
0.35 J
|
| Models 244581, 245301 |
60 kV
60 kV
|
| Models 244582, 245305 |
30–60 kV
30–60 kV
|
| Noise Data | |
| Sound power at 40 psi (0.28 MPa, 2.8 bar) |
90.4 dB(A)
90.4 dB(A)
|
| Sound power at 100 psi (0.7 MPa, 7 bar) |
105.4 dB(A)
105.4 dB(A)
|
| Sound pressure at 40 psi (0.28 MPa, 2.8 bar) |
87 dB(A)
87 dB(A)
|
| Sound pressure at 100 psi (0.7 MPa, 7 bar) |
99 dB(A)
99 dB(A)
|
| Wetted Parts | |
| Gun |
Stainless Steel, Nylon, Acetal, Ultra High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Wire, Polyethylene
Stainless Steel, Nylon, Acetal, Ultra High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Wire, Polyethylene
|
| Waterborne Fluid Hose |
PTFE
PTFE
|
| Suction Tube |
Polyethylene, Stainless Steel
Polyethylene, Stainless Steel
|
| Triton Pump |
See Triton Pump manual.
See Triton Pump manual.
|
Povezani izdelki
-
Pro Xp60 Electrostatic Spray Guns
Pro Xp60 kV electrostatic air spray gun is available in a variety of models for flex...
-
Pro Xs Waterborne Electrostatic Guns
Reduce operating costs with waterborne materials in a circulating system
-
Triton 1:1 150 Series
Effective alternative to traditional pressure pots and standard diaphragm pumps
-
Triton Pump Packages
Apply a high quality, decorative finish to wood and metal parts with this double diaphragm pump p...
-
WB3000
The simple and reliable way to isolate waterborne coatings