Reactor 2 E-30 Spray Foam and Polyurea Equipment

Next generation technology for spray foam insulation and polyurea

Where to Buy Request Info

Share |

Revolutionize the way you run your business

Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly. Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.

Reactor 2 E-30 gives you:

Compact footprint – more room in your spray rig
Ergonomic design – easier to service
Advanced control modules
Better spraying performance compared to traditional electric Reactor systems
Troubleshooting made quick and easy with QR codes

Graco InSite™ gives you:

Better control – manage your spray foam or polyurea business wherever you are
Better documentation – automatically collect job log data and spray parameters – lets you confirm the job was sprayed to specifications
Better fleet and crew management
Better cost containment and forecasting
Graco InSite comes standard on all Elite models of Reactor 2

Manuals

Literature

Other Resources

View values in metric units. View values in U.S. units.

Reactor 2 E-30 and E-XP2 Proportioning System
Maximum Fluid Working Pressure
E-30	2000 psi 14 MPa, 140 bar
E-XP2	3500 psi 24.1 MPa, 241 bar
Maximum Fluid Temperature
E-30	190°F 88°C
E-XP2	190°F 88°C
Maximum Flow Rate
E-30	30 lb/min 13.5 kg/min
E-XP2	2 gpm 7.6 lpm
Maximum Heated Hose Length
Length	310 ft 94 m
Output per Cycle, ISO and RES
E-30	0.0272 gal. 0.1034 liter
E-XP2	0.0203 gal. 0.0771 liter
Operating Ambient Temperature Range
Temperature	20° to 120°F -7° to 49°C
Line Voltage Requirement
Nominal 200–240 VAC, 1 Phase, 50/60 Hz	195–265 VAC 195–265 VAC
Nominal 200–240 VAC, 3 phase, DELTA, 50/60 Hz	195–265 VAC 195–265 VAC
Nominal 350–415 VAC, 3 phase, WYE, 50/60 Hz	340–455 VAC 340–455 VAC
Heater Power, (at 230 VAC rated voltage)
E-30 10 kW	10,200 Watts 10,200 Watts
E-30, 15 kW	15,300 Watts 15,300 Watts
E-XP2 15 kW	15,300 Watts 15,300 Watts
Sound Pressure, Sound Pressure measured per ISO-9614–2.
E-30, Measured from 3.1 ft (1 m), at 1000 psi (7 MPa, 70 bar), 3 gpm (11.4 lpm)	87.3 dBA 87.3 dBA
E-XP2, Measured from 3.1 ft (1 m), at 3000 psi (21 MPa, 207 bar), 1 gpm (3.8 lpm)	79.6 dBA 79.6 dBA
Sound Power
E-30, Measured from 3.1 ft (1 m), at 1000 psi (7 MPa, 70 bar), 3 gpm (11.4 lpm)	93.7 dBA 93.7 dBA
E-XP2, Measured from 3.1 ft (1 m), at 3000 psi (21 MPa, 207 bar), 1 gpm (3.8 lpm)	86.6 dBA 86.6 dBA
Fluid Inlets
Component A ISO) and Component B (RES)	3/4 NPT(f) with 3/4 NPSM(f) union 3/4 NPT(f) with 3/4 NPSM(f) union
Fluid Outlets
Component A (ISO)	#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
Component B (RES)	#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
Size	1/4 NPSM(m) 1/4 NPSM(m)
Maximum Pressure	250 psi 1.75 MPa, 17.5 bar
Dimensions
Width	26.3 in. 668 mm
Height	63 in. 1600 mm
Depth	15 in. 381 mm
Weight
E-30, 10 kW	315 lb 143 kg
E-30, 15 kW	350 lb 159 kg
E-30, 10 kW Elite	320 lb 145 kg
E-30, 15 kW Elite	355 lb 161 kg
E-XP2	345 lb 156 kg
E-XP Elite	350 lb 159 kg
Wetted Parts
Material	Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene