Graco Inc.

TrueCoat Pro-X II Electric  Airless Handheld Sprayer with ProSpray Technology

The TrueCoat Pro-X II electric airless sprayer is ideal for small jobs and touch-ups on interior and exterior applications

Request Info

The new TrueCoat Pro-X II electric airless sprayer includes a ProControl Pressure Control System that allows you to adjust the pressure to spray a wider variety of applications. Also included is a full motion of spraying with the new Tilt-N-Spray pendulum suction tube design, and the TrueCoat Pro-X II is fully repairable to extend the life of your sprayer! You’ll get maximum performance, reliability and finish quality that you’d expect from a Graco sprayer.

Patented ProSpray Technology delivers:

  • Same Pro Quality Finish as Graco’s professional airless sprayers
  • Sprays material as designed by the paint manufacturer – no thinning required!
  • Consistent, even spray pattern for one-pass coverage

TrueCoat Pro II Cordless


  • Achieve the best spray finish with thin and thick materials by simply adjusting the pressure
  • Expands the type of jobs that can be sprayed with a wider range of materials
  • More control and reduced overspray at lower fluid pressure
  • Graduated ProControl label allows repeatable settings for common applications

TrueCoat Pro II Cordless

Tilt-N-Spray Pendulum Suction Tube

  • Full range of motion of spraying up and down without losing prime – just like a contractor gun
  • Suction tube swings freely to evacuate virtually all of the material from the cup – fewer refills means more productive spray time!

Handheld Repair Kit 16P151

Fully Repairable

  • Ability to replace all parts of the sprayer with simple, modular components to extend the life of the sprayer


15 ft (4.57 m) SuperFlex Power Cord

  • No need for an extension cord for small projects

ProShot II Pump Armor

Pump Armor Storage/Start-up Tool

  • Protects pump from corrosion
  • Clears intake valve at startup to provide reliable priming every time


  • TrueCoat Pro-X II Cordless Airless Sprayer
  • 515 ProShot Reversible Tip
  • 32 oz (.95 l) Cup with Cover and 5 Cup Liners
  • Pump Armor Storage/Start-up Tool
  • Instructional DVD
  • Sprayer Storage Case

Electric Hand-Held Paint Sprayers
Maximum Amperage
2 Amps
2 Amps
Adjustable pressure range
1000 - 2000 psi
7.0 - 14 MPa, 69 -138 bar
Fixed Pressure
1300 psi
9.9 MPa, 89.6 bar
Maximum working pressure
2000 psi
14 MPa, 138 bar
6.04 lb: 6.86 lb (with 15 ft cord)
2.74 kg: 3.11 kg (4.6 m cord)
12.75 in.
32.4 cm
5.5 in.
14.0 cm
10.75 in.
27.3 cm
Storage temperature range *Pump damage will occur if fluid freezes in pump **Damage to plastic parts may result if impact occurs in low temperature conditions.
32° to 113° F
0° to 45° C
Operating temperature range *Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
40° to 90° F
4° to 32° C
Storage humidity range
0% to 95% relative humidity, non-condensing
0% to 95% relative humidity, non-condensing
Sound pressure level (Per ISO 9614–2 measured at 3.3 feet (1m)
73.2 dBa sound pressure level
73.2 dBa sound pressure level
84.2 dBa sound power level
84.2 dBa sound power level
84.2 dBa sound power level
Power Cord
18 AWG, 3-wire, 18 in.
1.0 mm2, 3-wire, 46 cm
18 AWG, 3-wire, 15 ft
1.0 mm2, 3-wire, 4.6 m
1.0 mm2, 3-wire, 4.6 m
Vibration level acceleration (Maximum measured battery voltage is 20v. Average running voltage is 18v.)
Less than 2.2feet/s²
Less than 0.67m/s²
Electrical Power Requirement
220/240 Vac, 50 Hz, 10A, 1 phase
220/240 Vac, 50 Hz, 10A, 1 phase