Cart
ToughTek M680a
ToughTek M680a Bare Piston Pump System, Stainless Steel Hopper
Part Number: 24T836
Available for purchase in: Australia & New Zealand, India, Japan, Korea, Mainland China, China Hong Kong SAR, China Taiwan
ToughTek M680a
ToughTek M680a Bare Piston Pump System, Stainless Steel Hopper
Part Number: 24T836
Available for purchase in: Australia & New Zealand, India, Japan, Korea, Mainland China, China Hong Kong SAR, China Taiwan
The ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials and tackles difficult polymers with fillers, such as glass flake, silica or sand. The all-stainless design makes cleanup...
More InfoFeatures
The ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials and tackles difficult polymers with fillers, such as glass flake, silica or sand. The all-stainless design makes cleanup of epoxy mortars easy and worry-free.
Portable sprayer for mortar, cementitious and heavily filled materials
Primary features:
- Low pressure pumping (13.7 to 34.5 bar/200 to 500 psi) reduces wear on pump lower
- Less material waste and more consistent finish than hand-trowelling
- Fast, easy cleaning with high velocity flush
- Can be quickly disassembled for hand cleaning
- Explosion-proof for hazardous spray areas
- One convenient air source to run pump and atomize air
Flex Hose Applicator
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T947
Pole Applicator
- For hard to reach areas
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T946
HTX 680 Applicator
- Good for lighter materials that do not typically pack out
- Includes Round Pattern Nozzles; provides a medium round pattern texture finish
- Air mixed into fluid through multiple venturi ports provides a consistent pattern
- Gives a more controlled pattern for lightweight materials or high solids coatings
- Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
- Order part number 24U209
Large Capacity Hopper
- 95 L (25 gal) hopper kit
- Ideal for materials that require more than 38 litre/10 gal capacity, such as fireproofing
- Boost productivity by minimising refills
- Easily connects to ToughTek M680a
- Easy to connect and maneuver
- Order part number 24W889
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Industrial |
|---|---|
| Compatible Material | Cementitious Material |
| Fluid Inlet Thread Gender | Male |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Stainless Steel |
| Maximum Flow Rate (gpm) | 10.88 |
| Maximum Operating Temperature (°F) | 120 |
| Maximum Working Pressure (MPa) | 7 |
| Maximum Working Pressure (psi) | 1000 |
| Model | ToughTek |
| Motor Type | Pneumatic |
| Series | M680a |
| Type | Pneumatic Piston Pump Package |
| Application | Industrial |
| Compatible Material | Cementitious Material |
| Fluid Inlet Thread Gender | Male |
| Fluid Outlet Size (cm) | 2.54 |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Size (mm) | 25.4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Stainless Steel |
| Maximum Working Pressure (MPa) | 7 |
| Maximum Working Pressure (bar) | 70 |
| Maximum Working Pressure (kPa) | 7000 |
| Maximum Working Pressure (psi) | 1000 |
| Model | ToughTek |
| Motor Type | Pneumatic |
| Series | M680a |
| Type | Pneumatic Piston Pump Package |
Product Manuals
Repair Parts
| Part No. | Description |
|---|---|
| M34LN0 | KIT, MOTOR, AIR, 7.5", 4.75 STROK |
