G-Mini Pumps

Robust, reliable and packed with power, the compact G-Mini® lubrication pump is built with rugged materials to handle small-scale lubrication, while withstanding the rigors of most environments, including harsh climates and worksites.

25R803_G_Mini_Controller_FF

Follower Plate & Stir Paddle 

  • This unique combination combats oil separation while ensuring the pump element “loading chamber” is always full.
close

Patent-Pending Heater

  • Pump grease down to -40º C/F when ordered with the heater option.
close

Two Control Options

  • No Controller: pair with either an external controller or PLC.
  • Controller: Easy-to-program controller can be utilized for both time based and cycle based systems and provides low level alert and alarm.
close

M12 Input

  • M12 cycle or proximity switch input standard on all pumps with a controller.

5-Wire CPC Power Cable

  • Multifunction cable supplies power to the pump, pairs with a remote manual run button, and provides low level or cycle fault output.
close

G-Series Pump Comparison Guide

Filter results


Reservoir Size (L)

(4)
(6)

Voltage (V dc)

(5)
(5)

Control Options

(4)
(6)

Application

(11)
(11)
(11)
(11)

Type

(10)
(1)

Filters

Resources

NAME
LANGUAGE
SIZE
FILE TYPE
DOWNLOAD
NAME
LANGUAGE
SIZE
FILE TYPE
DOWNLOAD

Graco G-Series Pump Comparison Guide

 

 G-Mini Pump

 

G1 Pump

 

G3 Pump

Reservoir 0.5 and 1 L
Include stir paddle and follower plate
2, 4 and 8 L
Include stir paddle; follower plate available
2, 4, 8, 12, 16 and 20 L
Include stir paddle; follower plate available
Fluids Grease up to NLGI #2 Oil, Grease up to NLGI #2 Oil, Grease up to NLGI #2
Power Source 12 VDC or 24 VDC 90-230 VAC, 12 VDC or 24 VDC 90-230 VAC, 12 VDC or 24 VDC
Control Standard and Controller Standard and Plus Standard, Pro, SP, Max
Control Features

One controller with 2 options:

Time-Based:

  • 1 to 30 min on time in 1-min increments
  • 15 min to 99 hr off time in 15-min increments up to 1 hr and then 1-hr increments from 1 to 99 hr
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube 

Cycle-Based:

  • 1 to 99 cycles
  • 15 min to 99 hr off time in 15-min increments up to 1 hr and then 1-hr increments from 1 to 99 hr
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube

Plus controller:

  • 1 to 30 min on time in 1-min increments
  • 1 to 24 hr off time in 1-hr increments
  • Manual run 
  • Pin code
  • Low-level shut down

Pro and Max controllers:

  • 1 sec to 30 min on time
  • 1 min to 99 hr 59 min off time
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Machine count
  • Pre-lube
  • 1 to 3 monitoring inputs for cycle or pressure*
  • DMS* 

*Max controller only

SP controller:

  • 1 to 99 cycles
  • 15 min to 8 hr off time in 15-min increments
  • 1 input for cycle • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube
Power Cord CPC; sold separately DIN or CPC; sold separately DIN or CPC; included
Pump Element 2 maximum; 1 factory-installed 1 maximum; 1 factory-installed 3 maximum; 1 factory-installed
Output Per Pump 0.18 in3 (3 cm3 ) / min 0.25 in3 (4 cm3 ) / min 0.25 in3 (4 cm3 ) / min
Maximum Working Pressure 4,100 psi (28 MPa, 280 bar) 5,100 psi (35 MPa, 352 bar) 5,100 psi (35 MPa, 352 bar)
Metering Device Series Progressive Series Progressive Series Progressive or Single Line Parallel (with addition of a G3 Vent Valve) 
Monitoring Controller can monitor 1 zone for cycles None SP controller can monitor 1 sensor for cycles;
Max controller can monitor up to 3
independent sensors for cycles or pressure
Proximity or Cycle Switch Type PNP Pump has no cycle input PNP or NPN
Electric Motor Inline gear box Load minimizing drive with offset cam design Load minimizing drive with offset cam design
Accessories Uses most G3 accessories including
pressure relief, power cables, high flow
fill stud, 5-gallon fill pump
Uses most G3 accessories including pressure relief, power cables, high-flow
fill stud, 5-gallon fill pump
See G3 Accessories in ILE Buyer’s Guide

Contact Us Today

Please enter a value
Please enter a value
Please select
Your email address is required
Please enter a value
Please enter a value

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Call Support

Call Support

Monday-Friday
7:30 a.m.-5 p.m. Central Time

Contact Us

Contact Us

Request a Quote

Request a Quote

We'll help you choose the right product for your use.

Graco