Cart
Reactor E-10
Reactor E-10 Heated Proportioner with 20 A Circuit, 240 V
Part Number: 249572
Reactor E-10
Reactor E-10 Heated Proportioner with 20 A Circuit, 240 V
Part Number: 249572
Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to set up and simple to operate,...
More InfoFeatures
Product BrochureGraco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to set up and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.
- Small size is ideal for on-site portability and hard-to-reach areas
- One-person operation saves time and money
- Use as an add-on to your existing spray business
- Versatile – switch from cold spray to hot spray to foam
- Saves 30% on material costs compared to disposable foam systems
- Electric power is low draw and plugs into standard outlets
- Intuitive start, stop and digital temperature display with single knob operation
- Pressure balance valves give you quick and easy balancing of system pressures
- Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
- Easy-to-service fluid section reduces maintenance and increases productivity
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 1/4 |
|---|---|
| Air Outlet Size (in) | 1/4 |
| Air Outlet Thread Type | NPSM |
| Application | Spray Foam |
| Applicator Type | Manual |
| Compatible Material | Plural-Component |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | No Gun |
| Hose Type | No Hose |
| Material Application | Polyurethane Foam |
| Maximum Flow Rate (lb/min) | 12 |
| Maximum Fluid Temperature (°F) | 160 |
| Maximum Hose Length (ft) | 35 |
| Maximum Mix Ratio | 1:1 |
| Maximum Working Pressure (MPa) | 13.8 |
| Maximum Working Pressure (psi) | 2000 |
| Model | Reactor |
| Overall Depth (in) | 30 |
| Overall Height (in) | 44 |
| Overall Width (in) | 26.5 |
| Power Rating (HP) | 5.10 |
| Power Rating (W) | 3800 |
| Power Rating (kW) | 3.8 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Product Type | Plural Component |
| Series | E-10 |
| Sound Pressure Level (dB(A)) | 84.5 |
| Tank Capacity (gal) | 7 |
| Type | Proportioner Package |
| Voltage (V) | 240 |
| Wetted Material | Aluminium, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
| Air Inlet Size (cm) | 0.635 |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Size (mm) | 6.35 |
| Air Outlet Size (cm) | 0.635 |
| Air Outlet Size (in) | 1/4 |
| Air Outlet Size (mm) | 6.35 |
| Air Outlet Thread Type | NPSM |
| Application | Spray Foam |
| Applicator Type | Manual |
| Compatible Material | Plural-Component |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | No Gun |
| Hose Type | No Hose |
| Material Application | Polyurethane Foam |
| Maximum Flow Rate (kg/min) | 5.44 |
| Maximum Fluid Temperature (°C) | 71 |
| Maximum Hose Length (m) | 94.5 |
| Maximum Mix Ratio | 1:1 |
| Maximum Working Pressure (MPa) | 13.8 |
| Maximum Working Pressure (bar) | #138 |
| Maximum Working Pressure (kPa) | 13800 |
| Model | Reactor |
| Overall Depth (cm) | 76.2 |
| Overall Depth (mm) | 762 |
| Overall Height (cm) | 111.8 |
| Overall Height (mm) | 1118 |
| Overall Width (cm) | 67.3 |
| Overall Width (mm) | 673 |
| Power Rating (W) | 3800 |
| Power Rating (kW) | 3.8 |
| Power Source | Electric |
| Pressure Type | Low Pressure |
| Product Type | Plural Component |
| Series | E-10 |
| Sound Pressure Level (dB(A)) | 84.5 |
| Tank Capacity (l) | 26.5 |
| Type | Proportioner Package |
| Voltage (V) | 240 |
| Wetted Material | Aluminium, Brass, Carbide, Carbon Steel, Chrome, PTFE, Stainless Steel, UHMWPE |
Product Manuals
