Graco Inc.

TrueCoat Pro II Electric

Handheld Airless Sprayer

The TrueCoat Pro II electric handheld airless sprayer is ideal for small jobs and touch-ups on interior and exterior applications

Where to BuyRequest Info
TrueCoat Pro II spraying exterior deck railing

The new TrueCoat Pro II electric airless sprayer includes a ProControl Pressure Control System that allows you to adjust the pressure to spray a wider variety of applications. Also included is a full motion of spraying with the new Tilt-N-Spray pendulum suction tube design, and the TrueCoat Pro II is fully repairable to extend the life of your sprayer! You’ll get maximum performance, reliability and finish quality that you’d expect from a Graco sprayer.

Patented ProSpray Technology delivers:

  • Same Pro Quality Finish as Graco’s professional airless sprayers
  • Sprays material as designed by the paint manufacturer – no thinning required!
  • Consistent, even spray pattern for one-pass coverage

pressure control

ProControl

  • Achieve the best spray finish with thin and thick materials by simply adjusting the pressure
  • Expands the type of jobs that can be sprayed with a wider range of materials
  • More control and reduced overspray at lower fluid pressure
  • Graduated ProControl label allows repeatable settings for common applications

flexible suction tube

Tilt-N-Spray Pendulum Suction Tube

  • Full range of motion of spraying up and down without losing prime – just like a contractor gun
  • Suction tube swings freely to evacuate virtually all of the material from the cup – fewer refills means more productive spray time!

pump repair kit

Fully Repairable

  • Ability to replace all parts of the sprayer with simple, modular components to extend the life of the sprayer

Pump Armor storage start-up tool

Pump Armor Storage/Start-up Tool

  • Protects pump from corrosion
  • Clears intake valve at startup to provide reliable priming every time

power cord

15 ft (4.57 m) SuperFlex Power Cord

  • No need for an extension cord for small projects

TrueCoat Pro II storage case

Sprayer Storage Case

  • Extra room for tips, rags, filters and paint supplies
  • Convenient carrying from job-to-job
  • Durable all-in-one storage case protects all components inside

TrueCoat Pro II Electric includes

Includes:

  • TrueCoat Pro II Electric Airless Sprayer
  • 515 TrueCoat Reversible Tip
  • 32 oz (.95 l) Cup with Cover and 5 Cup Liners
  • Pump Armor Storage/Start-up Tool
  • Instructional DVD
  • Sprayer Storage Case

Manuals

Literature

Hand-Held Sprayer (Models: 16N673, 16N659)
Adjustable Pressure Range
1000 - 2000 psi
7 - 14 MPa, 69 - 138 bar
Maximum Amperage
4 Amps
4 Amps
Weight
6.04 lb
2.74 kg
Dimensions
Length
12.75 in
32.4 cm
Width
5.5 in
14.0 cm
Height
10.75 in
27.3 cm
Storage Temperature Range. Pump damage will occur if fluid freezes in pump. Damage to plastic parts may result if impact occurs in low temperature conditions.
32° to 113°F
0° to 45°C
Operating Temperature Range. Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
40° to 90°F
4° to 32°C
Storage Humidity Range
0% to 95% relative humidity, non-condensing
0% to 95% relative humidity, non-condensing
Sound Pressure Level, per ISO 3744 measured at 3.3 feet (1m).
70.5 dBa (for sound power level, add 81.5 dBa)
70.5 dBa (for sound power level, add 81.5 dBa)
Vibration Level Acceleration per ISO 5349, no load condition
Less than 2.2 ft/s2
Less than 0.67 m/s2
Power Cord
18 AWG, 3-wire, 18 in
1.0 mm 2, 3-wire, 46 cm
Electrical Power Requirement
120 Vac, 60 Hz, 15A, 1 phase
120 Vac, 60 Hz, 15A, 1 phase