Looking for product education, product support and repair parts? You’ll find replacement parts, troubleshooting tips, repair information, service center locations, warranty and return information and much more here.
Abrasive Blasting and the Future of Shipyard Surface Prep
Fairhaven Shipyard, the 800-foot pier owned and operated by Puglia Engineering, Inc. faces many surface preparation and cleaning challenges.
EcoQuip Atex FAQ
Graco's EcoQuip Product Manager and blasting expert answers some frequently asked questions about ATEX standards, Vapor Abrasive Blasting, and the EcoQuip ATEX System
EcoQuip Successfully Tested in Hazardous Locations
Norway-based Gexcon AS performed various tests to determine whether the EcoQuip equipment blasting process would create a potential ignition in explosive atmospheres
How to Select an Airless Sprayer for Industrial Coatings
Equipment selection is critical to the successful application of industrial coatings - understand what you need to consider when choosing and airless sprayer.
Automatic Internal and External Pipe Coating
A key to Italian Industrial Agency's (IIA) success in offering of automatic internal and external coatings was to strike a balance between cost effectiveness and productivity.
Silica Comparison Wet vs. Dry Blasting
Third-party Industrial Hygiene Survey in order to evaluate potential exposures to respirable airborne dust and respirable silica
Fusion PC Gun
A quick-change cartridge to replace the entire front fluid section of your Fusion AP Gun.
TerraThane Pipeline Trench Breakers Success Story
For pipeline pillows and trench breaks, TerraThane worked perfectly - it did the job on the slope and in the inclement weather, taking much less time than other legacy products to cure in place.
How to Minimize Air Motor Freezing
Using the same basic principle as household refrigerators, air motor icing or freezing occurs when air is compressed and then is rapidly depressurized.
Corrosion Protection Part 1: Intro to CleanWirx
A thoroughly cleaned surface virtually free from surface contaminants leads to improved coating adhesion and reduced likelihood of corrosion
Corrosion Protection Part 2: CleanWirx and EcoQuip
Together, vapor abrasive blast cleaning and CleanWirx provide a particularly strong combination in surface preparation
Abrasive Blasting with ARMEX Soda
Soda blasting has been successfully used for a variety of abrasive blasting applications since the 1980's
What is Wet / Vapor Abrasive Blasting
Learn about wet / vapor abrasive blasting and how it's different than other methods, such as dry blasting and wet blasting.
Concrete Surface Prep Part 1: Unsound Concrete
How does the blaster know when he’s achieved the specified surface profile on concrete?
How to Choose the Right Blasting Abrasive
What to consider when selecting abrasive media for wet or dry blasting
Keeping You Spraying - The Graco Difference
Learn about the key points of difference that set Graco apart and help us produce the high quality equipment our customers have come to depend on for decades.
Characteristics of Knockdown Ceiling Texture
Knockdown and Splatter finishes are associated with a consistent round-droplet pattern on the surface with a final smoothing step.
Resistance Control Mode
Learn about the benefits of Resistance Mode, how to upgrade your Reactor 2 software, and how to use Resistance Mode on your Reactor 2 spray foam machine.
How to Spray Inorganic Zinc Primers
To properly spray inorganic zinc primers, it's as much about how you handle the material as it is about the pump. Here's why.
Applying High Solids Coatings with Short Pot Life
Italian sandblasting and coatings specialist, Civardi, was looking for a solution to apply high-solids coatings with a short pot-life
New Plural-Component Sprayers Deliver High-Flow Capabilities
Learn how the latest sprayer technology is driving labor savings, reduced maintenance, and improved overall quality
How to Get Consistent Drywall Texture Finishes
Achieving a consistent texture pattern is based on three main elements: Material Consistency, Air Pressure Consistency, and Application Technique
Choosing the Right Texture Hopper Gun
Choosing the right hopper gun is critical to minimizing time spent on the job and achieving a consistent texture finish throughout the application.
Intro to Airless Paint Spraying
By applying paint in an even, consistent manner, airless spraying allows you to achieve professional results faster and easier than using a brush or roller.
Silica Dust and Wet Abrasive Blasting
Innovation in abrasive blasting technology being driven by the need to control silica dust
Curb Masters Nicollet Mall Sidewalk Stencil
Curb Masters uses Graco’s EcoQuip to add stencil design to Nicollet Mall sidewalks in downtown Minneapolis
True Dustless Blasting is a Myth
Know the facts: there is no such thing as dustless or dust-free blasting in surface prep
How to Choose the Right Blast Nozzle for Wet Abrasive Blasting
What you need to know to choose the right nozzle for your abrasive blasting application
Cleaning Polyurethane Foam On Concrete
Polyurethane foam is difficult to scrape, sand, or chemically remove from concrete - vapor abrasive blasting does this easily, and require no harsh chemicals