- Powerful hybrid heater provides up to 15,300 watts of heat to pre-heat material quickly
- Digital heat and pressure controls
- Easy to use
- Quick knockdown lower pumps for easy maintenance
- Rugged and portable
- Circulation valves with long-lasting seals
- Hose heat transformer that doesn't require tap settings
Reactor E-XP1 Electric Coatings Proportioner
For polyurea coatings - applies up to 2 gal (7.6 liters) per minute
Graco Reactor E-XP1 proportioner is engineered to process and spray polyurea and other coatings that require high pressures. The hybrid heater and heated hose condition the materials to the right viscosity prior to mixing. Quick knockdown lower pump for easy maintenance, easy-to-use controls, and rugged, portable design make the Reactor the preferred choice for coatings applications.
Graco also offers an electric proportioner in its new Reactor 2 series, the Reactor 2 E-XP2. Count on Graco Reactor E-Series proportioners for power, performance and productivity on fast-curing polyurea coatings. And get the job done faster and more reliably than ever before.
All Graco Reactor E-Series Proportioners provide:
Manuals
- 312065V, Manual, Reactor, Electric Proportioners, Operation, English [other languages]
- 312066ZAF, Reactor, Electric Proportioners, Repair-Parts, English [other languages]
- 312067H, Manual, Reactor, Electric Proportioners, Electrical Diagrams, English
- 312069E, Heater Control Upgrade Kit 247838, Instructions-Parts, English
Literature
- 300615EN, Reactor Spray Foam and Polyurea Equipment Brochure [other languages]
- 349104EN, Reactor Parts and Accessories Brochure [other languages]
- 349435EN-A, Reactor Maintenance Schedule
- 349890EN, Spray Foam Equipment Brochure
- 350238EN, Ratio Assurance White Paper [other languages]
300615EN, Reactor Spray Foam and Polyurea Equipment Brochure
349104EN, Reactor Parts and Accessories Brochure
Other Resources
| Reactor E-20, E-30, E-XP1, E-XP2 Series | |
| Maximum Fluid Working Pressure | Models E-20 and E-30: 2000 psi, Model E-XP1: 2500 psi, Model E-XP2: 3500 psi Models E-20 and E-30: 14 MPa, 140 bar, Model E-XP1: 17.2 MPa, 172 bar, Model E-XP2: 24.1 MPa, 241 bar |
| Maximum Fluid Temperature | 190°F 88°C |
| Maximum Output | Model E-20: 20 lb/min, Model E-30: 30 lb/min, Model E-XP1: 1 gpm, Model E-XP2: 2 gpm Model E-20: 9 kg/min, Model E-30: 13.5 kg/min, Model E-XP1: 3.8 liter/min, Model E-XP2: 7.6 liter/min |
| Output per Cycle (A and B) | Model E-20 and E-XP1: 0.0104 gal., Model E-30: 0.0272 gal., Model E-XP2: 0.0203 gal. Model E-20 and E-XP1: 0.0395 liter, Model E-30: 0.1034 liter, Model E-XP2: 0.0771 liter |
| Amperage Requirement | See Table 1, page 20 in manual 312065 See Table 1, page 20 in manual 312065 |
| Heater Power | Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts |
| Sound Power, per ISO 9614–2 | Model E-20: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 93.5 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 83.5 dB(A) at 3000 psi, 1.0 gpm Model E-20: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 93.5 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 83.5 dB(A) at 21 MPa, 210 bar, 3.8 lpm |
| Sound Pressure 1 m from equipment | Model E-20: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 83.6 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 73.6 dB(A) at 3000 psi, 1.0 gpm Model E-20: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 83.6 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 73.6 dB(A) at 21 MPa, 210 bar, 3.8 lpm |
| Fluid Inlets | 3/4 npt(f), with 3/4 npsm(f) union 3/4 npt(f), with 3/4 npsm(f) union |
| Fluid Outlets | Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter |
| Fluid Circulation Ports | 1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum 1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum |
| Weight | Model E-20 and E-XP1: 342 lb, Model E-30: 400 lb, Models E-XP2 and E-30 with 15.3kW of heat: 438 lb Model E-20 and E-XP1: 155 kg, Model E-30: 181kg, Models E-XP2 and E-30 with 15.3kW of heat: 198 kg |
| Wetted parts | Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene |
| Voltage Tolerance Range (50/60 Hz) | |
| 200–240 V ac Nominal, 1 Phase | 195–264 V ac, 50/60 Hz 195–264 V ac, 50/60 Hz |
| 200–240 V ac Nominal, 3 Phase Delta | 195–264 V ac, 50/60 Hz 195–264 V ac, 50/60 Hz |
| 350–415 V ac Nominal, 3 Phase Wye (200–240 V ac Line-to-Neutral) | 338–457 V ac, 50/60 Hz 338–457 V ac, 50/60 Hz |
| All other brand names or marks are used for identification purposes and are trademarks of their respective owners. | |
Accessories
-
Fusion Air Purge
For high output spray polyurethane foam and polyurea applications
-
Fusion CS
For high output spray polyurethane foam and polyurea applications
-
Probler P2
For high output spray polyurethane foam and polyurea applications
-
Reactor Heated Hose
For Reactor proportioners
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Twistork Agitators
For mixing fluids in closed drums
Related Products
-
Reactor 2 E-30
Next generation technology for spray foam insulation and polyurea
-
Reactor 2 E-30i
Turnkey system for spray foam insulation and coating - applies up to 30 lb (13.6 kg) per minute
-
Reactor 2 E-XP2i
Turnkey system for polyurea waterproof coating and lining - applies up to 2 gal (7.6 liters) per minute
-
Reactor A-25
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
-
Reactor E-10
For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute
-
Reactor E-10hp
Entry-level system for pure and hybrid polyurea coatings
-
Reactor E-20
For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute
-
Reactor E-8p for Insulation
For air sealing attics and rim joists with unheated spray polyurethane foam
-
Reactor H-25, H-40 and H-50
For medium to high-output foam applications and roofing projects - applies up to 52 lb (23...
-
Reactor H-XP2 and H-XP3
For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute