Series 22 | Epoxoline
Modified Polyamine Epoxy | Tnemec
Tnemec Series 22 Epoxoline
An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water, wastewater, crude oil, and finished fuel environments. Specialized curing mechanism allows for faster cure response with airless spray application.
Series 22-WH11 Off-White, 22-1218 Light Blue and 22-1255 Beige are certified by NSF International in accordance with NSF/ANSI Std. 61 and are qualified for use on tanks and reservoirs of five (5) gallons capacity or greater, pipes 1/2" in diameter or greater and valves 1/2" in diameter or greater. Series 20HS, FC20HS, 91-H2O, 94-H2O, N140, N140F, V140 and V140F are the only Std. 61 certified primers for use with Series 22. Reference the "Search Listings" section of the NSF website at www.nsf.org for details on the maximum allowable DFT.
Series 22 conforms to AWWA C 210. Series 22 conforms to API 652 for lining above ground storage tanks. Series 61 is the recommended primer for use with Series 22 in crude oil or finished fuel immersion service environments. Contact your Tnemec representative for systems and additional information.
Colors: WH11 Off-White, 1218 Light Blue, 1255 Beige
Volume Solids: 100% (mixed)
Recommended DFT: 16 to 40 mils (400 to 1016 microns) in one or two coats.
VOC (Unthinned): 0.10 lbs/gallon (12 grams/litre)
VOC (Thinned 5%): 0.44 lbs/gallon (52 grams/litre)
Theoretical Coverage: 1,604 mil sq ft/gal (39.4 m²/L at 25 microns).
Mix Ratio: By volume: One (Part A) to one (Part B).
|Dry Mils (microns)||Wet Mils (microns)||Sq Ft/Gal (m²/Gal)|
|Minimum||16.0 (400)||16.0 (400)||100 (9.3)|
|Maximum||40.0 (1016)||40.0 (1016)||40 (3.7)|