Reactor A-25
Air-Driven Foam Proportioner
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.
- Maintains temperature setpoints for better yield
- Maintains consistent output pressure for uniform spray pattern
- Easy to operate and maintain
- Best choice for affordability and durability
Manuals
Literature
| Reactor A-25 | |
| Maximum Fluid Working Pressure |
1920 psi
13 MPa/130 bar
|
| Maximum Input Pressure to Motor |
120 psi air
0.82 MPa/8.2 bar air
|
| Pressure Ratio Air |
16:1
16:1
|
| Air Inlet |
1/2 npsm(f)
1/2 npsm(f)
|
| Recommended Air Supply Hose Size |
1/2 in ID minimum
13 mm minimum
|
| Air Consumption |
40 scfm /120 psi, 1.6 gpm
0.82 MPa/8.2 bar, 6.1 lpm
|
| Recommended Hydraulic Supply Hose Size |
3/4 in ID minimum
19 mm ID minimum
|
| Recommended Hydraulic Return Hose Size |
1 in ID minimum
25 mm ID minimum
|
| Fluid Inlets |
3/4 npt(f)
3/4 npt(f)
|
| Fluid Circulation Ports |
1/4 npsm(m), with plastic tubing/250 psi maximum
1/4 npsm(m), with plastic tubing, 1.75 MPa/17.5 bar maximum
|
| Maximum Fluid Temperature |
190° F
88° C
|
| Maximum Output (10 weight oil at ambient temperature) |
25 lb/min at 75 cycles/min
11 kg/min at 75 cycles/min
|
| Output per cycle (A and B) |
0.031 gal
0.117 l
|
| Heated Power (A and B Heaters, no hose) |
10200 Watts
10200 Watts
|
| Sound Power, per ISO 9614–2 |
94.7 dB(A) at 1000 psi, 3.0 gpm, 15 cpm
94.7 dB(A) at 7 MPa, 70 bar, 11.4 lpm, 15 cpm
|
| Sound Pressure, 1 m from equipment |
81 dB(A) at 1000 psi, 3.0 gpm, 15 cpm
81 dB(A) at 7 MPa, 70 bar, 11.4 lpm, 15 cpm
|
| Wetted Parts |
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
|
| Line Voltage Requirement | |
| 230V 1 phase and 230V 3 phase units |
195-264 Vac, 50/60 Hz
195-264 Vac, 50/60 Hz
|
| 380V 3 phase units |
338-457 Vac, 50/60 Hz
338-457 Vac, 50/60 Hz
|
| Fluid Outlets | |
| Component A (ISO) |
#8 JIC (3/4-16 unf), with #5 JIC adapter
#8 JIC (3/4-16 unf), with #5 JIC adapter
|
| Component B (RES) |
#10 JIC (7/8-14 unf), with #6 JIC adapter
#10 JIC (7/8-14 unf), with #6 JIC adapter
|
