Cart
Wolverine Advanced
Wolverine® Advanced Duplex Chemical Injection Pump, 230/460 VAC 3-Phase Motor, 5/8 in. Plunger, FKM-ETP Seals
Part Number: A26740
Wolverine Advanced
Wolverine® Advanced Duplex Chemical Injection Pump, 230/460 VAC 3-Phase Motor, 5/8 in. Plunger, FKM-ETP Seals
Part Number: A26740
Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.
- Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
- Our injection pumps are designed for years of operation before simple repairs.
- Each pump features an adjustable fluid packing that can last up to 25 times longer than non-adjustable seals.
- Designed to operate in environments from -40°C to 79°C (-40° F to 175°F). They have 316 SST wetted parts, plus they’re sealed against water and dust.
- Flow rates up to 1,628 lpd (430 gpd) and a pressure rating up to 686 bar, 68.9 MPa (10,000 psi).
- Long-lasting seals can easily be replaced in less than ten minutes, on site.
- Precision stroke adjustment between 12.7 mm (1/2 in.) and 25.4 mm (1 in.) ensures accurate injection rates.
- HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
- Low friction drivetrain to optimise electrical efficiency, reducing the load on your power system.
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
|---|---|
| Fluid Inlet Size (in) | 1/4 |
| Fluid Outlet Size (in) | 1/4 |
| Input Voltage (V AC) | 230 |
| Material | Stainless Steel |
| Maximum Flow Rate (GPD) | 218 |
| Maximum Input Amperage (A) | 0.59 |
| Maximum Working Pressure (MPa) | 6.2 |
| Maximum Working Pressure (psi) | 900 |
| Model | Wolverine |
| Motor Type | Ordinary Location |
| Number of Fluid Heads | 2 |
| Plunger Size (in) | 5/8 |
| Power Rating (HP) | 0.2 |
| Seal Material | FKM-ETP |
| Series | Advanced |
| Type | Electric Chemical Pump |
| Voltage | 230/460 VAC |
| Voltage (V AC) | 230/460 |
| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
| Fluid Inlet Size (cm) | 0.635 |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Size (mm) | 6.35 |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Input Voltage (V AC) | 230 |
| Material | Stainless Steel |
| Maximum Input Amperage (A) | 0.59 |
| Maximum Working Pressure (MPa) | 6.2 |
| Maximum Working Pressure (bar) | 62 |
| Maximum Working Pressure (kPa) | 6200 |
| Maximum Working Pressure (psi) | 900 |
| Model | Wolverine |
| Motor Type | Ordinary Location |
| Number of Fluid Heads | 2 |
| Seal Material | FKM-ETP |
| Series | Advanced |
| Type | Electric Chemical Pump |
| Voltage | 230/460 VAC |
| Voltage (V AC) | 230/460 |
Product Manuals
