Cart
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 4000cc, 3.7 kW (5 HP), 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, Stand
Part Number: YD3341
Image is for illustrative purposes only.
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 4000cc, 3.7 kW (5 HP), 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, Stand
Part Number: YD3341
Direct current (DC) circulation pump with intelligent (i) control drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Direct current (DC) circulation pump with intelligent (i) control drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate.
Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 3.7 kW (5 horse power (HP)) motor simply needs an annual oil change to keep running efficiently.
- ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- Stainless steel (SST) lower is coated with Ultralife for extensive durability.
- Floor stand has a compact footprint with a space-saving vertical design.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC, Water-borne |
| Cycles Per Gallon | 0.95 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Thread Type | Sanitary Quick Clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Thread Type | Sanitary Quick Clamp |
| Fluid Section Type | Sealed 4-Ball |
| Includes | Basic Controls, Floor Stand |
| Input Voltage (V AC) | 380 - 480 |
| Lower Type | Sealed 4-Ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (gpm) | 21.1 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 2.1 |
| Maximum Working Pressure (psi) | 300 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 5 |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
| Application | Circulation |
| Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC, Water-borne |
| Cycles Per Gallon | 0.95 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Type | Sanitary Quick Clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Outlet Thread Type | Sanitary Quick Clamp |
| Fluid Section Type | Sealed 4-Ball |
| Includes | Basic Controls, Floor Stand |
| Input Voltage (V AC) | 380 - 480 |
| Lower Type | Sealed 4-Ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (l/min) | 80 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 2.1 |
| Maximum Working Pressure (bar) | 20.7 |
| Maximum Working Pressure (kPa) | 2068.5 |
| Maximum Working Pressure (psi) | 300 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | AC |
| Output Per Cycle (cm³) | 4000 |
| Portable | Non-Portable |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
Product Manuals
