Supply & Circulation Pumps

Graco circulation pumps and supply pumps for manufacturing and industrial applications are available in pneumatic, electric or hydraulic configurations. These rugged and reliable paint pumps feature a low-noise design and the ability to smoothly change paint colours, which saves operator time. Graco pumps use high quality motors capable of handling high pressures for a broad range of paints and coatings.

AIR OPERATED, ELECTRIC OR HYDRAULIC PAINT PUMP CONFIGURATIONS

EXPERIENCE FASTER CHANGEOVERS

Energy Efficient Paint Pumps Reduce Operating Costs

Graco’s reliable circulation pumps and supply pumps use high performance, yet energy efficient motors. The result: you’ll reduce operating costs for every Graco paint pump on your factory floor.

Minimise Downtime

Graco’s sealed lower not only has longer maintenance cycles, but it is also easier, faster and cheaper to replace than an entire circulation pump or paint pump assembly. Ideal for pumping application in your mix room, including catalysed coatings.

Lower Noise Levels Improves Working Conditions

Graco’s noise reduction technology in our electric motors helps lower noise levels throughout your manufacturing facilities. In turn, operators experience more comfortable working conditions.

Filter results


Type

(1)
(1)
(6)
(2)
(1)
(2)
(7)
(1)

Application

(4)
(2)

Wetted Material

(2)
(2)
(2)
(3)
(2)
(2)

Filters
E_FloDCi_4Ball2500_4000cc

Direct current (DC) electric piston pumps with intelligent (i) control drive efficiency and sustainability for high volume industrial paint circulation. The circulation pump’s 4-ball lowers come in 750 to 4,000 cc configurations that meet every flow application.

21997_605x525

Graco’s E-Flo DC 4-Ball Electric pumps are ideal for small to medium circulation systems with outputs up to 2,000 cc per cycle.

S4B_Vicount_1239_625x525

Graco’s Viscount 4-Ball Circulation Pump utilises hydraulic powered piston pump technology to make it up to three times more efficient than comparable compressed air systems.

18364_605x525

Graco’s E-Flo 4-Ball Pumps for liquid coatings have a dual lower and outputs up to 4,000 cc per cycle.

21971_605x525

Graco’s E-Flo 2-Ball electric supply pump is for applications requiring high pressure, up to 206 bar (3,000 psi). Plus the minimal pulsation at changeover provides a more consistent finish.

E_FloDCi_2Ball

Direct current (DC) electric piston pumps with intelligent (i) control supply high volume liquid finishing applications. With a 145 to 1,000 cc volume per cycle range, the supply pump’s 2-ball lowers achieve 6:1 to 46:1 equivalent pressure ratios.

Have Questions? Let's Talk.

E-mail Support

E-mail Support

Find a Distributor

Find a Distributor

For local sales and service support

Graco