- Delivers open bead or closed continuous bead patterns
- Provides a circular loop swirl bead pattern
- Swirl pattern has uniform bead profile and consistent edges
- Increased tip standoff simplifies robot programming
- Swirl pattern can be varied along the bead path
- Swirl orbital applicator has no dynamic seals
PrecisionSwirl Orbital Applicator Module
Applies a uniform swirl pattern in robotic applications
PrecisionSwirl features adjustable rotational speed, stand-off distance and flow rate for greater control and for better penetration on irregular shaped parts. It is compatible with most sealants including expandable sealers, heat cure epoxy and PVC plastisol.
PrecisionSwirl produces no air turbulence so the bead profile is consistent over the bead length, reducing squeeze-out, repair and scrap. The applicator produces a wide variety of pattern widths, material thicknesses and patterns.
Manuals
- 310554V - PrecisionSwirl Module, Instructions-Parts List, English [other languages]
- 309403P - PrecisionSwirl Orbital Dispenser, Instructions-Parts, English [other languages]
- 3A1935D- PrecisionSwirl, Instructions-Parts, English [other languages]
309403P - PrecisionSwirl Orbital Dispenser, Instructions-Parts, English
Literature
| PrecisionSwirl | |
| Control Assembly | |
| Input power |
100–240 VAC, 50/60 Hz, 1 PH
100–240 VAC, 50/60 Hz, 1 PH
|
| Output power |
Proprietary PWM voltage to the motor, less than 24 V
Proprietary PWM voltage to the motor, less than 24 V
|
| Automatic control analog input |
0–10 VDC for 6600–24000 RPM
0–10 VDC for 6600–24000 RPM
|
| Speed signal output |
0–10 VDC for 0–24000 RPM
0–10 VDC for 0–24000 RPM
|
| Auto control relay contact rating |
3 Amps at 30 VDC
3 Amps at 30 VDC
|
| Weight |
23.5 lb
10.7 kg
|
| Orbital Dispenser | |
| Input power |
Proprietary PWM voltage to the motor, less than 24 V
Proprietary PWM voltage to the motor, less than 24 V
|
| Motor torque |
1.5 oz-in.
1.5 oz-in.
|
| Maximum motor speed |
24000 RPM
|
| Maximum operating pressure |
3500 psi
241 bar, 24.1 MPa
|
| Fluid inlet |
3/4–16 37° JIC female swivel
3/4–16 37° JIC female swivel
|
| Nozzle attachment |
#10–32 proprietary connection
#10–32 proprietary connection
|
| Wetted components |
Stainless steel, nickel alloy, brazing alloy, epoxy, EPDM rubber
Stainless steel, nickel alloy, brazing alloy, epoxy, EPDM rubber
|
| Noise levels |
Sound pressure level — 67 dBa
Sound pressure level — 67 dBa
|
| Weight |
1.6 lb
0.7 kg
|
