Tamms Structural Mortar
Fiber Reinforced, NSF/ANSI 61 Certified Repair Mortar | Euclid Chemical
Tamms Structural Mortar
Product Description:
TAMMS STRUCTURAL MORTAR is a single-component repair mortar applied by low pressure spray or by hand for structural concrete repairs. TAMMS STRUCTURAL MORTAR is a proprietary formulation of portland cement, graded aggregates, unique fibers, and polymers used to increase adhesion, strength, and sprayability.
Primary Applications:
- Vertical and overhead concrete repairs
- Interior and exterior use
- Bridge, parking garages, and tunnels
- Compatible with galvanic anodes
- Manholes, pipelines, dams and other waste water structures
Features / Benefits:
- Low pressure spray or trowel applied
- 30 minute working time
- Single-component, micro-fiber enhanced
- Silica fume and polymer enhanced
- 3/8” (0.95 cm) to 2.0” (5 cm) applications
- Contains an integral corrosion inhibitor
- Freeze-thaw resistant
- NSF/ANSI Standard 61 certified
Technical information:
The following are typical values obtained under laboratory conditions. Expect reasonable variation under field conditions.
Set Time (ASTM C 266, Gilmore)
Initial Set (approx hrs): 1
Final Set (approx hrs): 2
Compressive Strength psi (MPa)
1 day: 3,200 (22.0)
7 days: 6,200 (42.7)
28 days: 8,500 (58.6)
Flexural Strength psi (MPa)
7 days: 1,500 (10.3)
28 days: 1,650 (11.4)
Shear Bond Strength psi (MPa)
28 days: 3,250 (22.4)
Splitting Tensile Strength psi (MPa)
7 days: 480 (3.3)
28 days: 660 (4.5)
Freeze Thaw Resistance
300 cycles: 96% RDF
Chloride Permeability
ASTM C 1202: 1,050 coulombs
Coverage per coat:
One 50 lb (22.7 kg) bag yields approximately 0.45 cu. ft. (poly-lined bags)
*Note: For complete product information, please refer to www.euclidchemical.com
Video: ToughTek Successfully Pumps Euclid Chemical Mortar Materials