Nova-Plate UHS
Epoxy Novolac Tank Lining | Sherwin-Williams

Nova-Plate UHS Epoxy Novolac
Product Description:
NOVA-PLATE UHS is a solvent free, edge retentive epoxy novolac with proven long term performance as a lining for bulk storage tanks, pipe internals and secondary containment where a higher degree of resistance is needed.
PRODUCT CHARACTERISTICS:
Finish: Gloss
Color: Light Gray, White, Green
Volume Solids: 100% mixed
VOC (EPA Method 24): <100 g/L; 0.83 lb/gal
Mix Ratio: 4:1 by volume
Recommended Spreading Rate per coat:
1 Coat | 2 Coats | |||
Minimum | Maximum | Minimum | Maximum | |
Wet mils (microns) | 15.0 (375) | 35.0 (875) | 10.0 (250) | 12.0 (300) |
Dry mils (microns) | 15.0 (375) | 35.0 (875) | 10.0 (250) | 12.0 (300) |
Total mils (microns) | 15.0 (375) | 35.0 (875) | 20.0 (500) | 24.0 (600) |
~Coverage sq ft/gal (sq m/L) | 45 (1.1) | 105 (2.6) | 130 (32) | 160 (3.9) |
Theoretical coverage sq ft/gal (sq m/L) @ 1 mil / 25 microns dft | 1604 (39.4) | |||
Shelf Life: | 24 months, unopened - store indoors at 40˚F (4.5˚C) to 100˚F (38˚C) |
Flash Point: | >230˚F (110˚C), PMCC, mixed |
Reducer: | Not recommended |
Clean Up: | MEK or Reducer #104 |
Weight: | 11.20 ± 0.3 lb/gal ; 1.34 Kg/L, mixed |
Airless Spray
Unit | 50:1 or greater |
Pressure | 4000 psi minimum (275 bar) |
Hose | 3/8" ID (9.5 mm) |
Tip | .017"-.019" (0.43-0.48 mm) |
Fluid Temperature at tip | 90°F-95°F (32°C-35°C) |
*Note: For complete product information, please refer to sherwin-williams.com.
Recommended Products
for spraying Nova-Plate UHS
Brochure Download
Oil & Natural Gas Industry Brochure: Sherwin-Williams and Graco
Download the Oil & Natural Gas Industry Brochure and see how Graco equipment matches-up with Sherwin-Williams coatings