Cart
Carclad ER Epoxy
Two-component, Fast-curing Epoxy | Sherwin-Williams
Carclad ER Epoxy
Product Description:
CARCLAD ER EPOXY is a two-component, edge retentive, fast curing epoxy system. It dries very quickly allowing increased production for rail shops.
Features:
- One-coat self-priming
- High build for good coverage on rough corners and edges
- Fast Dry
PRODUCT CHARACTERISTICS:
Finish: Gloss
Color: Black and Gray. Other colors available upon request
Volume Solids: 100% (Theoretical)
Weight Solids: 100% (Theoretical)
VOC (EPA Method 24): <85 g/L; 0.71lb/gal, mixed
Mix Ratio: 1:1 by volume
Recommended Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils | 5.0 | 11.0 |
| Dry mils | 5.0 | 11.0 |
| ~Coverage sq ft/gal | 145 | 320 |
Application Equipment:
The following is a guide. Changes in pressures and tip sizes may be needed for proper spray characteristics. Always purge spray equipment before use with listed reducer. Any reduction must be compliant with existing VOC regulations and compatible with the existing environmental and application conditions.
| Clean Up | Reducer R7K111 |
Plural Component Spray
| Pump | Graco Xtreme Mix |
| Pressure | 4000 psi minimum |
| Hose | 3/8" |
| Tip | .021"-.025" |
| Pump Heater Setting | 70 - 80 |
| Material Temp @ Gun | 85°F - 130°F (as needed) |
| Reduction | Not recommended |
Recommended Uses:
- Rail Cars
- Tank Cars
*Note: For complete product information, please refer to sherwin-williams.com.
Contact an Expert
Custom Equipment
