Cart
Envirolastic 940 LV
Direct-to-Metal Polyaspartic Coating | Sherwin-Williams
Envirolastic 940 LV
Product Description:
ENVIROLASTIC 940 LV is a high build, direct-to-metal polyaspartic coating that can be applied in a single coat. This fast drying, <250 g/l VOC formula reduces dirt pick up, improves productivity and can be applied at temperatures as low as 35°F (5°C).
Features:
- Single coat application
- Direct to metal
- Corrosion resistant
- High film build in one coat
- No gassing
- Outstanding application properties
- Fast cure
PRODUCT CHARACTERISTICS:
Finish: Semi-Gloss
Color: Extra White and Ultradeep tint bases Safety Yellow, Safety Red, Black Wide Range of custom colors available
Volume Solids: 71% ± 2%, mixed, may vary by color
VOC (EPA Method 24): 220 g/L; 1.84 lb/gal, mixed/unreduced may vary by color
Mix Ratio: 2:1 by volume
Recommended Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 9.0 (225) | 13.0 (325) |
| Dry mils (microns) | 6.0 (150) | 9.0 (225) |
| ~Coverage sq ft/gal (sq m/L) | 127 (3.2) | 190 (4.7) |
| Theoretical coverage sq ft/gal (sq m/L) @ 1 mil / 25 microns dft | 1139 (28.4) | |
| NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance. |
Application Equipment:
The following is a guide. Changes in pressures and tip sizes may be needed for proper spray characteristics. Always purge spray equipment before use with the listed reducer. Any reduction must be compliant with existing VOC regulations and compatible with the existing environmental and application conditions.
| Reducer / Clean Up | Reducer R7K216, M.E.K., Reducer #111 |
Airless Spray
| Pressure | 2200-2700 psi minimum (152 -186 bar) |
| Hose | 1/4" ID (6.4 mm) |
| Tip | .517"-.521" (0.43-0.53 mm) |
| Filter | 60 mesh |
| Reduction | As needed up to 5% by volume |
| Gun | Airles Gun |
| Pump | 30:1 |
Intended Uses:
- Replaces conventional epoxy/urethane systems
- Acceptable for use in high performance architectural applications
- Ideal for maintenance or new construction applications
- Suitable for use in the Mining & Minerals Industry
- Direct to properly prepared steel and galvanizing in industrial environments
*Note: For complete product information, please refer to sherwin-williams.com.
Contact an Expert
Custom Equipment
