Super Flo-Top
Cementitious Self-Leveling Underlayment | Euclid Chemical
Euclid Chemical Super Flo-Top
Product Description:
SUPER FLO-TOP is a single-component, cement based, free-flowing, self-leveling compound specially designed for easy application over concrete floors as an underlayment for subsequent placement of floor coverings. It is suitable for use as a repair and leveling course and may be applied at thicknesses from featheredge to 1" (25 mm) neat. SUPER FLO-TOP may be used as a light-duty (foot traffic only) wearing surface, when protected by a Euclid Chemical epoxy/urethane system.
Primary ApplicationS:
- Leveling interior or exterior (see precautions/limitations) sound concrete surfaces
- Leveling wood subfloors
- Over radiant heat systems
- Light duty wearing surface
Features / Benefits:
- Fluid consistency for self-leveling applications
- Pumpable through standard equipment
- Self-leveling for smooth, flat floors
- High early strength for early turnaround
- Excellent bond strength
- Excellent self-healing properties
Technical information:
The following are typical values obtained under laboratory conditions. Expect reasonable variation under field conditions.
Compressive Strength
ASTM C109 2" (50 mm) cubes
4 hours: 1,300 psi (9 MPa)
24 hours: 2,200 psi (15 MPa)
7 days: 3,000 psi (21 MPa)
28 days: 3,500 psi (24 MPa)
56 days: 4,000 psi (27 MPa)
Bond Strength
ASTM C 1583
7 days: 250 psi (1.7 MPa)
28 days: 280 psi (1.9 MPa)
Unit Weight (approx)
118 lbs/cu. ft. (1890 kg/cu. m.)
Final Set Time
(ASTM C 191)
1 to 1.5 hrs
Appearance
SUPER FLO-TOP is a free-flowing powder designed to be mixed with water that dries to a light gray finish.
Packaging/Yield
SUPER FLO-TOP is packaged in 50 lb (22.7 kg) bags that yield approximately 0.52 cu. ft. (0.015 cu. m. ) of material.
Coverage
Coverage is approximately 25 sq. ft. (2.3 sq. m.) at a 1/4” (6 mm) thickness
*Note: For complete product information, please refer to www.euclidchemical.com
Video: ToughTek Successfully Pumps Euclid Chemical Mortar Materials