Cart
Merkur
10:1 Merkur Pump, 4.5 lpm (1.2 gpm) fluid flow, Wall Mount, Pump/Gun Air Controls, Suction Hose
Part Number: G10W03
Image is for illustrative purposes only.
Merkur
10:1 Merkur Pump, 4.5 lpm (1.2 gpm) fluid flow, Wall Mount, Pump/Gun Air Controls, Suction Hose
Part Number: G10W03
Merkur fine finish pump packages are designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
(English Only)
Merkur fine finish pump packages are designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- External valve access allows for easy servicing and online replacement to minimise downtime
- Operator Control Panel located at operator height for easy setting and monitoring
- Throat seal and rod enclosure protects pumped material and wet cup from contamination but can be easily removed to monitor and service
(English Only)
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Water-borne, Solvent-borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating |
|---|---|
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/8 |
| Fluid Outlet Thread Type | NPT |
| Gun Included | 0 |
| Gun Model | No Applicator |
| Gun Technology | Bare Package |
| Gun Type | No Applicator |
| Hose Inlet Diameter (in) | 3/16 |
| Includes | Pump and Gun Air Controls, Suction Hose |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Flow Rate (gpm) | 1.2 |
| Maximum Working Pressure (psi) | 1000 |
| Model | Merkur |
| Mount Type | Wall Mount |
| Power Source | Air |
| Pressure Type | High Pressure |
| Product Type | Bare Package |
| Pump Ratio | 10:1 |
| Pump Type | Pneumatic Piston Pump |
| Spray Type | No Applicator |
| Sprayer Type | High Pressure |
| Technology Type | Airless |
| Type | Bare Package |
| Weight (lb) | 43 |
| Wetted Material | Stainless Steel, Tungsten Carbide with 6% Nickel, UHMWPE, PTFE, Nylon |
| Compatible Material | Water-borne, Solvent-borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating |
| Fluid Inlet Size (cm) | 1.905 |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Size (mm) | 19.05 |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (cm) | 0.9525 |
| Fluid Outlet Size (in) | 3/8 |
| Fluid Outlet Size (mm) | 9.525 |
| Fluid Outlet Thread Type | NPT |
| Gun Included | 0 |
| Gun Model | No Applicator |
| Gun Technology | Bare Package |
| Gun Type | No Applicator |
| Hose Inlet Diameter (cm) | 0.476 |
| Hose Inlet Diameter (in) | 3/16 |
| Hose Inlet Diameter (mm) | 4.76 |
| Includes | Pump and Gun Air Controls, Suction Hose |
| Maximum Air Inlet Pressure (bar) | 7 |
| Maximum Air Inlet Pressure (kPa) | 700 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Flow Rate (l/min) | 4.5 |
| Maximum Working Pressure (bar) | 69 |
| Maximum Working Pressure (kPa) | 6900 |
| Maximum Working Pressure (psi) | 1000 |
| Model | Merkur |
| Mount Type | Wall Mount |
| Power Source | Air |
| Pressure Type | High Pressure |
| Product Type | Bare Package |
| Pump Ratio | 10:1 |
| Pump Type | Pneumatic Piston Pump |
| Spray Type | No Applicator |
| Sprayer Type | High Pressure |
| Technology Type | Airless |
| Type | Bare Package |
| Weight (kg) | 19.5 |
| Wetted Material | Stainless Steel, Tungsten Carbide with 6% Nickel, UHMWPE, PTFE, Nylon |
Product Manuals
Sales Literature
