Liqui-Form 3500 (LF3500)

Thermally Conductive, One-Part, Liquid Formable Gel | Henkel

Liqui-Form TLF LF3500

PRODUCT DESCRIPTION:

BERGQUIST® LIQUI FORM TLF LF3500 is a high conductivity gel thermal interface material designed for demanding applications that require a balance between dispensability and low component stress during assembly and also in the application. 

PRODUCT CHARACTERISTICS:

Colour: Grey

Operating Temperature Range: -60 to 200ºC 

Thermal Conductivity (W/mk): 3.5

Density g/ml: 3.1

Volume Resistivity (ohm-meter): 1x10"

Recommended Uses:

  • Handheld devices 
  • Bare die to heat spreader lid
  • Filling various gaps between heat-generating devices to heat sink and housing
  • Devices requiring low assembly pressure
  • High value assemblies with rework
  • BGA, PGA, PPGA

For complete product information, please refer to henkel-adhesives.com

 

Graco system solution:

 

UNIXACT C300 AUTOMATION TABLE:

  • Work Envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in) 
  • Approximate Overall Dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in) 
  • Drive Method: Ball screw drives with linear guide bearings
  • Drive System: Servo drive motors for X, Y, Z, and theta (dispense)
  • Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
  • Position Repeatability: 0.01 mm (0.0004 in)
  • Dispense Speed: 100 mm/s (4 in/s)

PROGRESSIVE CAVITY PUMP:

  • Consists of a rotor and stator that create sealed cavities for the material to flow through. 
  • With high accuracy and repeatability, Graco's Progressive Cavity Pump is well-suited for abrasive materials
  • Continuous, volumetric dispense with high repeatability
  • Wide range of adjustable flow rates
  • Wear-resistant and low maintenance
  • Available in several volumes for application flexibility

DYNAMITE 22 SUPPLY SYSTEM:

  • The ideal solution for delivering precise and consistent material feed from small containers ranging from 300cc cartridges to 3.78 litre (1 gallon) pails
  • Extensive product life-cycle even for heavy duty applications using highly viscous, abrasive materials
  • With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space and allow great flexibility
  • Simple, user-friendly design

For complete product information, please refer to www.henkel-adhesives.com.

Download the spec sheet

Contact an expert

Please enter a value
Please enter a value
Please select
Your email address is required
Please enter a value
Please enter a value
Please enter a value

Recommended Products

For applying Liqui-Form 3500

Have Questions? Let's Talk.

E-mail Support

E-mail Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.

Graco