InvisiPac HM25c
InvisiPac HM25c Hot Melt Delivery System without Pattern Controller, 4 Channel, 400-480V 3P
Part Number: 25C720
InvisiPac HM25c
InvisiPac HM25c Hot Melt Delivery System without Pattern Controller, 4 Channel, 400-480V 3P
Part Number: 25C720
Proven adhesive savings, unmatched reliability. Unlike traditional tanks and many "tankless" systems, the proprietary melt-on-demand technology of the InvisiPac system keeps a steady flow of adhesive feeding in, melting quickly and dispensing immediately. You save on adhesive and costs incurred with...
More Info
Features
Proven adhesive savings, unmatched reliability. Unlike traditional tanks and many "tankless" systems, the proprietary melt-on-demand technology of the InvisiPac system keeps a steady flow of adhesive feeding in, melting quickly and dispensing immediately. You save on adhesive and costs incurred with unscheduled maintenance downtime. With the InvisiPac system's robust reporting capabilities, you have the data to make smart decisions about your line that can improve efficiency, decrease costs, minimize downtime and improve productivity.
- Better Performance No plugged nozzles No char-filled tanks Quick, 10-minute startup Improved operator safety High performance with lasting component
- Greater Cost Savings Consistent adhesive viscosity No degraded material Little to no waste Better dispensing control Use any adhesive you choose
Specifications & Documents
Technical Specifications
Convert to ImperialAir Inlet Size (in) | 1/4 |
---|---|
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Ambient/Warm Melt/Hot Melt | Hot Melt |
Application | Bonding |
Applicator Type | Automatic |
Channels | 4 |
Component Type | Single Component |
Footprint (in) | 25.4 x 16.5 x 26.3 |
Frequency (Hz) | 50/60 |
Gun Activation | Automatic |
Maximum Air Inlet Pressure (psi) | 100 |
Maximum Flow Rate (lb/hr) | 96 |
Maximum Fluid Temperature (°F) | 400 |
Maximum Hose Length (ft) | 30 |
Maximum Working Pressure (MPa) | 8.3 |
Maximum Working Pressure (psi) | 1200 |
Melt Rate (lb/hr) | 25 |
Model | InvisiPac |
Overall Depth (in) | 16.5 |
Overall Height (in) | 52.5 |
Overall Width (in) | 25.4 |
Pattern Controller | No |
Phase | 3 |
Power Source | Electric |
Power Type | Electric |
Pump | Pneumatic piston, 12:1 |
Series | HM25c |
Time to Temperature | Less than 10 minutes |
Transformer | Yes |
Type | Dispensing System |
Voltage (V AC) | 400-480 |
Weight (lb) | 160 |
Wetted Material | Aluminium, PTFE, Stainless Steel, Brass, Chrome, Zinc Plating, Carbon Steel, Carbide, Chemically Resistant O-Rings |
Air Inlet Size (cm) | 0.635 |
Air Inlet Size (in) | 1/4 |
Air Inlet Size (mm) | 6.35 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Ambient/Warm Melt/Hot Melt | Hot Melt |
Application | Bonding |
Applicator Type | Automatic |
Channels | 4 |
Component Type | Single Component |
Footprint (in) | 25.4 x 16.5 x 26.3 |
Frequency (Hz) | 50/60 |
Gun Activation | Automatic |
Maximum Air Inlet Pressure (bar) | 6.9 |
Maximum Air Inlet Pressure (kPa) | 690 |
Maximum Air Inlet Pressure (psi) | 100 |
Maximum Flow Rate (kg/hr) | 43.5 |
Maximum Fluid Temperature (°C) | 204 |
Maximum Hose Length (m) | 9.14 |
Maximum Working Pressure (MPa) | 8.3 |
Maximum Working Pressure (bar) | 83 |
Maximum Working Pressure (kPa) | 8300 |
Maximum Working Pressure (psi) | 1200 |
Melt Rate (kg/hr) | 11.3 |
Model | InvisiPac |
Overall Depth (cm) | 41.9 |
Overall Depth (mm) | 419 |
Overall Height (cm) | 133.4 |
Overall Height (mm) | 1334 |
Overall Width (cm) | 64.5 |
Overall Width (mm) | 645 |
Pattern Controller | No |
Phase | 3 |
Power Source | Electric |
Power Type | Electric |
Pump | Pneumatic piston, 12:1 |
Series | HM25c |
Time to Temperature | Less than 10 minutes |
Transformer | Yes |
Type | Dispensing System |
Voltage (V AC) | 400-480 |
Weight (kg) | 73 |
Wetted Material | Aluminium, PTFE, Stainless Steel, Brass, Chrome, Zinc Plating, Carbon Steel, Carbide, Chemically Resistant O-Rings |
Product Manuals
CAD Drawings
25C700-3D-EN.zip
(30 MB)