Cart
Python XL DA
Python XL-DA Pneumatic Chemical Injection Pump, 114.3 mm (4-1/2 in.) Air Motor, 12.7 mm (1/2 in.) Plunger, Chromex Coated, HNBR Seals, CE Approved
Part Number: A22406
Python XL DA
Python XL-DA Pneumatic Chemical Injection Pump, 114.3 mm (4-1/2 in.) Air Motor, 12.7 mm (1/2 in.) Plunger, Chromex Coated, HNBR Seals, CE Approved
Part Number: A22406
Python XL-DA series pumps are suitable for chemical injection applications that require higher flows at high pressures. These pumps operate on low gas or compressed air pressures and utilise the same Merkur® air motor used on other Graco products. The Graco patented high efficiency air valve helps m...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Python XL-DA series pumps are suitable for chemical injection applications that require higher flows at high pressures. These pumps operate on low gas or compressed air pressures and utilise the same Merkur® air motor used on other Graco products. The Graco patented high efficiency air valve helps minimise fugitive emissions and gas recovery can be achieved on specific models. The Python XL-DA pumps fluid in both stroke directions which provides continuous flow operation and prevents the pump from air locking.
- Double-Acting
Pumps fluid in both directions of the stroke for increased flows- Provides continuous flow operation for better pump efficiencies
- 63.5 mm (2.5 inch) pump stroke for high flow rates
- Self-Priming
- Anti-locking so air cannot get trapped inside air motor and stall pump
- Pump can free itself of air and resume pumping without any adjustments
- Ease of Serviceability
- Simple pump design for quick seals replacement
- Pumps are installed vertically for a reduced footprint
- Minimum number of tools required
- Environmentally friendly
- Recoverable exhaust gas with kit
- Less fugitive emissions
- 114.3 mm (4.5 inch) air motors come ready for a gas recovery add-on kit
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Motor Size (in) | 4-1/2 |
|---|---|
| Application | Non-Hazardous Location |
| Approvals | CE |
| Fluid Inlet Size (in) | 1/2 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Operating Temperature (°F) | 176 |
| Maximum Working Pressure (MPa) | 42.6 |
| Maximum Working Pressure (psi) | 6175 |
| Minimum Operating Temperature (°F) | -40 |
| Model | Python |
| Plunger Material | Chromex Coated |
| Plunger Size (in) | 1/2 |
| Seal Material | HNBR |
| Series | XL DA |
| Type | Pneumatic Chemical Pump |
| Air Motor Size (in) | 4-1/2 |
| Application | Non-Hazardous Location |
| Approvals | CE |
| Fluid Inlet Size (in) | 1/2 |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Operating Temperature (°C) | 80 |
| Maximum Working Pressure (MPa) | 42.6 |
| Maximum Working Pressure (bar) | 426 |
| Maximum Working Pressure (kPa) | 42600 |
| Maximum Working Pressure (psi) | 6175 |
| Minimum Operating Temperature (°C) | -40 |
| Model | Python |
| Plunger Material | Chromex Coated |
| Plunger Size (cm) | 1.3 |
| Plunger Size (mm) | 12.7 |
| Seal Material | HNBR |
| Series | XL DA |
| Type | Pneumatic Chemical Pump |
Product Manuals
