Cart
E-Flo DCi 2-Ball
E-Flo DCi 2-ball electric pump, 25:1, 290cc, 3 HP, carbon steel construction, advanced controls, no stand
Part Number: Y25A10
Image is for illustrative purposes only.
E-Flo DCi 2-Ball
E-Flo DCi 2-ball electric pump, 25:1, 290cc, 3 HP, carbon steel construction, advanced controls, no stand
Part Number: Y25A10
The dual control (DC) supply pump with intelligence (i) has a 290 cc volume per cycle range. The 2-ball lower attains a 25:1 equivalent pressure ratio.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
The dual control (DC) supply pump with intelligence (i) has a 290 cc volume per cycle range. The 2-ball lower attains a 25:1 equivalent pressure ratio.
Electric piston pump supplies paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- The modular 3 horse power (HP) motor enables easy replacement of existing Graco pneumatic or hydraulic pump motors.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- The DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
- Advanced controls integrate easily with intrinsically safe input/output (IO).
- Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
- ATEX, IECEx, JPNEx, CCCEx and KCS certifications confirm safe operation worldwide.
- The wetted section has an affordable carbon steel construction.
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Supply |
|---|---|
| Compatible Material | Solvent-borne, High Solids, Xirallic, CARC, Metallics |
| Control Options | Advanced |
| Fluid Inlet Size (in) | 1.25 |
| Fluid Inlet Thread Gender | Male |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 0.75 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Lower Type | 3 Xtreme/2 Leather, Carbon Steel |
| Material | Carbon Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (gpm) | 1.5 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 16.5 |
| Maximum Working Pressure (psi) | 2400 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Mount Type | No Mount |
| Phase | 3 |
| Portable | Non-Portable |
| Power Rating (HP) | 3 |
| Pump Ratio | 25:1 |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
| Voltage (V) | 380-480 VAC |
| Weight (lb) | 219 |
| Application | Supply |
| Compatible Material | Solvent-borne, High Solids, Xirallic, CARC, Metallics |
| Control Options | Advanced |
| Fluid Inlet Size (in) | 1.25 |
| Fluid Inlet Size (mm) | 31.75 |
| Fluid Inlet Thread Gender | Male |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 0.75 |
| Fluid Outlet Size (mm) | 19.1 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Lower Type | 3 Xtreme/2 Leather, Carbon Steel |
| Material | Carbon Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (l/min) | #5.8 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 16.5 |
| Maximum Working Pressure (bar) | #165 |
| Maximum Working Pressure (psi) | 2400 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Mount Type | No Mount |
| Phase | 3 |
| Portable | Non-Portable |
| Pump Ratio | 25:1 |
| Pump Size (cc) | 290 |
| Series | DCi 2-Ball |
| Type | Electric Piston Pump |
| Voltage (V) | 380-480 VAC |
| Weight (kg) | 99 |
Product Manuals
