Check-Mate Pumps and Supply Systems

Check-Mate Pumps and Supply Systems reliably deliver one-component sealants, adhesives and other medium to high viscosity materials from pails or drums to metering and dispensing systems.

System Features and Benefits

  • Available in Carbon Steel and Stainless Steel models; SST models for waterborne compatibility
  • Large internal porting for maximum flow
  • Floating piston seal and priming plate improve balance and performance
  • Maintains balance over a wide viscosity range 
  • Minimal bead distortion for critical dispensing of expensive materials
  • High flow and pressures increase production 
  • High output per cycle reduces wear for longer life and lower repair costs 

Typical Applications

  • Feeding high volume applicators, multiple meters or proportioners 
  • Transferring sealants or adhesives to one or more operator dispensing stations 
  • Packaging drums, pails, caulking tubes or chubs

Typical Fluids Handled

  • Sealants
  • Adhesives
  • Silicones
  • Epoxies
  • Acrylics
  • Urethanes
  • Inks
  • Mastics
  • Lubricants 
  • Butyls
  • PVC sealers 
  • Caulking compounds
Check-Mate Lower

Check-Mate Pump Features

  1. Xtreme Coupler: Quick-disconnect coupler for easy maintenance
  2. Optional Enclosed Wet Cup: Prevents seal contamination and allows recirculation, and reduces maintenance and extends seal life
  3. Cartridge Throat Packings: Allows for easy servicing without removing from ram
  4. Cast Outlet and Inlet Housing: Improves structural integrity
  5. Piston Valve with Floating Piston Seal: For maximum pressure balance over a range of material viscosities 
  6. Hard Part Coatings: Standard Severe Duty coating on rods and cylinder maximises wear life
  7. Replaceable Seat: Minimises service cost
  8. Floating Priming Plate: Provides uniform balance and flow
Loading...
Unable to load product data.

Filter results


Filters

1-15 of 20 results

Choose Elite construction for applications of highly abrasive thermal interface materials (TIMs), silicones, urethanes, and epoxies. When your system configuration includes pumps and valves with Elite construction, you can expect to…

  • dispense at least 50,000 gallons (200,000 liters) before noticing any wear on pump pistons and cylinders*
  • get at least 10 times more equipment life, compared to standard systems* 

How do we know? Read the research.

* Results may vary. Variables affecting component life include, but are not limited to, material chemistry/fillers, flow rate, cycle rate, maintenance diligence, and system pressure.

Documents & Videos

NAME
LANGUAGE
SIZE
FILE TYPE
DOWNLOAD
2.3 MB
PDF

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

E-mail Support

E-mail Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.

Graco