Graco Inc.

Fusion Mechanical Purge  Plural-Component Spray Gun

For high output spray polyurethane foam and polyurea applications

Where to BuyRequest Info
Share |

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

Fusion Mechanical Purge Main Needs
  • Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
  • Long-lasting PolyCarballoy mix module
  • Advanced mix module and tip provides superior mixing capabilities
View values in metric units. View values in U.S. units.

Fusion Plural Component, Impingement Mix Mechanical Purge Spray Gun
Maximum Fluid Working Pressure
3500 psi
24.2 MPa, 242 bar
Minimum Air Inlet Pressure
80 psi
0.55 MPa, 5.5 bar
Maximum Air Inlet Pressure
130 psi
0.9 MPa, 9 bar
Maximum Fluid Temperature
200°F
94°C
Air Inlet Size
1/4 npt Quick Disconnect Nipple
1/4 npt Quick Disconnect Nipple
A Component (ISO) Inlet Size
-5 JIC; 1/2-20 UNF
-5 JIC; 1/2-20 UNF
B Component (Resin) Inlet Size
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
Typical Flow rate
See charts in instruction manual
See charts in instruction manual
Sound Pressure
70 dB(A), at 100 psi (0.7 MPa, 7 bar)
70 dB(A), at 100 psi (0.7 MPa, 7 bar)
Sound Power, measured per ISO 9416–2
79.9 dB(A), at 100 psi (0.7 MPa, 7 bar)
79.9 dB(A), at 100 psi (0.7 MPa, 7 bar)
Length
7.6 in.
193 mm
Height
8.1 in.
206 mm
Width
3.1 in.
79 mm
Weight
2.9 lb
1.32 kg
Wetted Parts
Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™
Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™