Therm-a-Gap Gel 30

PRODUCT DESCRIPTION:

THERMA-GAP™ Gel 30 is a fully cured dispensable gel designed to decrease installation costs, reduce customer manufacturing complexity, and eliminate time-consuming hand assembly. It requires no mixing or curing, providing superior design flexibility. 

PRODUCT CHARACTERISTICS:

Colour: Pink

Thermal conductivity (W/m-K): 3.5  cps @ 150ºC

Flow rate (grams/min@90 psi): 20g

Density: 3.25

Volume resistivity (ohm-cm): 10"

Outgassing (%TML/%CVCM) by mass: .07

Recommended uses:

• Automotive electronic control units (ECU's)
• Power supplies & Semiconductors
• Memory & Power modules
• Microprocessors / graphics
• Processors
• Flat panel displays & Consumer electronics

Graco system solution:

Unixact c300 automation table:

• Work envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in) 
• Approximate overall dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in) 
• Drive method: ball screw drives with linear guide bearings
• Drive system: servo drive motors for X, Y, Z, and theta (dispense)
• Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
• Position repeatability: 0.01 mm (0.0004 in)
• Dispense speed: 100 mm/s (4 in/s)

PROGRESSIVE CAVITY PUMP:

• Consists of a rotor and stator that create sealed cavities for the material to flow through. 
• With high accuracy and repeatability, Graco's progressive cavity pump is well-suited for abrasive materials
• Continuous, volumetric dispense with high repeatability
• Wide range of adjustable flow rates
• Wear-resistant and low maintenance
• Available in several volumes for application flexibility

Dynamite 22 supply system:

• The ideal solution for delivering precise and consistent material feed from small containers ranging from 300 cc cartridges to 1 gallon pails
• Extensive product lifecycle even for heavy duty applications using highly viscous, abrasive materials
• With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space requirements and allowing great flexibility
• Simple, user-friendly design

For complete product information, please refer to www.parker.com

Download the spec. sheet