Tier 1 supplier

OEMs (original equipment manufacturers) demand components that look good and work well under harsh conditions. Tier 1 suppliers throughout the automotive industry achieve durable coatings and precise fluid dispense with Graco solutions.

Contact an expert

An automobile body goes into the paint shop in the Tier 1 factory

Automotive manufacturing

Improve productivity

To improve efficiencies and accommodate varied production requirements, OEMs rely on tier suppliers for subassembly operations. From bonding and sealing to fluid dispense and finishing, Graco has a unique line of products for subassembly components.

Bonding, sealing & encapsulation

Paint kitchen

Spray booth

Fluid dispense

Bonding, sealing & encapsulation

For the sealing, bonding, and encapsulation of automotive components, there is a wide range of materials available, such as 1-component, 2-component or hot melt materials. At Graco we offer you solutions to pump, meter, mix or dispense these wide varieties of adhesives, which can range from low to very high viscosity materials. Assembly applications include:

Structural adhesives
Seam sealing
Noise and vibration dampening
Glass bonding
Encapsulating automotive sensors and electronic components
Headlight bonding

1k Ultra-Lite - Precision Dispense Valve

Maximise production and material performance with our complete range of 1K Ultra-Lite Applicator & Dispense Valves from Graco. These lightweight valves were designed for durability and long service life for a multitude of bead dispense applications.

Endure - Automatic Dispense Valves

Air-operated dispense valves used for sealant and adhesive materials. Graco EnDure valves offer exceptional reliability for high-pressure, high flow sealant and adhesive dispensing. Precise flow control which yields excellent bead geometry, trust our EnDure valves.

MD2 - Two Component Mixing Dispense Valve

Struggling to get the mixing of your 2K materials just right? Having trouble meeting high flow demands? Some materials can be challenging to handle, causing loss of quality, hardware malfunctions and costly maintenance and reworks when handled incorrectly. Our mixing and dispensing valves minimise d...

Unidrum

Graco UniDrum Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from bulk containers to metering and dispensing systems.

Paint kitchen

Mixing room equipment handles advanced paint chemistry, including adhesion promoters, primers, base coats, clear coats, and two or three-component materials.

Intelligent paint kitchen

Increase efficiency with remote monitoring and control. The Intelligent Paint Kitchen is a complete, cost effective solution for the entire paint room.

Plural component mixing equipment

Our plural component mixing equipment, including mechanical and electric proportioners, gives you the option to mix two-component and three-component materials. Graco’s flexible paint mixing systems easily handle a broad spectrum of materials, including solvent-borne, waterborne epoxies, and acid ca...

Supply & Circulation Pumps

Graco circulation and supply pumps for manufacturing and industrial applications are available in pneumatic, electric or hydraulic configurations. These rugged and reliable paint pumps feature a low-noise design and the ability to smoothly change paint colours, which saves operator time. Graco pumps...

Sealed 4-Ball Lowers

Keep your paint circulation system up-and-running with minimal maintenance. Sealed 4-ball pump lowers are easier, faster and cheaper to replace than pump assemblies. Completely sealed, this lower works for any pumping application in your paint mix room - even catalysed coatings.

Paint Kitchen Accessories

Enhance your paint kitchen with Graco’s high-quality accessories. We have a wide array of accessories designed specifically for paint kitchens and they’re manufactured to the same quality standards as all of our products.

Paint spray booth

Manual and electrostatic spray guns evenly coat automotive parts. Positive displacement (PD) flow control ensures the right amount and colour reach each part.

Air Spray Guns

An air spray gun uses a low-pressure fluid stream with compressed air at the air cap to atomise material in a controlled manner. Used to spray low to medium viscosity fluids, this air paint gun method produces a high quality, Class A or decorative finish.

Electrostatic Spray Guns

Achieve high transfer efficiency and an even coating with an electrostatic spray gun. Electrostatic paint guns also increase finish quality and production throughput, while decreasing VOCs (volatile organic compounds) and HAPs (hazardous air pollutants).

ProBell

Easy to integrate, operate, and service, ProBell® brings convenience and high performance to any finishing application in any industry. The automatic rotary atomiser continually improves quality, transfer efficiency and cleanliness while spraying with robots, reciprocators or on a fixed mount.

ProMix PD POSITIVE DISPLACEMENT PUMP SYSTEM

MAXIMISE ACCURACY IN YOUR FACTORY PAINT MIX ROOM

Fluid dispense

Automatic or manual fluid control systems accurately dispense oil, grease, coolant, water, or other fluids from hazardous or non-hazardous locations.

ProDispense System

Graco’s electronic fluid dispense and meter system allows durable goods manufacturers to quickly and precisely fill cavities with coolant, dye, grease, oil, paint, solvent, water or other industrial fluids.

Electrostatic paint gun case study:

Electrostatic paint gun case study: Thanks to Graco’s Pro Xpc, piston, reduced paint consumption and improved product quality.

Get the full story

Finishing solutions for automotive components

Get the flexibility to apply primers, base coats, and top coats with a single system.

Automotive Tier 1 Supplier Accomplishes More with Less Equipment

ProMix PD enables a paint line to do the work of eight robots with only four.

Finishing solutions for backlit displays

Get the precision needed to ensure the icon on the display is vividly illuminated.

Automotive Tier 1 Supplier Accomplishes More with Less Equipment

ProMix PD enables a paint line to do the work of eight robots with only four.

3 steps to VOC reduction in industrial painting

With three simple steps manufacturers can reduce their VOC emissions and avoid legal penalties.

Please describe your need or application requirement here*

Please enter a value

First Name*

Please enter a value

Last Name*

Please enter a value

Country*

Please select

Email*

Phone*

Please enter a value

Company Name*

Please enter a value

Yes, I'm interested in receiving email updates on new products and promotions, tips and tricks, and other Graco news.

Your privacy is very important to Graco. We will not sell your information to other companies. However, to best serve your needs, your information may be shared with Graco's distributor partners. For details, view our Privacy Policy.

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

Send a message

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Send a message

Find a Distributor

Back

Back

Back

Back

Back

Back

Back

Back

Tier 1 supplier

Automotive manufacturing

Improve productivity

1k Ultra-Lite - Precision Dispense Valve

Endure - Automatic Dispense Valves

MD2 - Two Component Mixing Dispense Valve

Unidrum

Intelligent paint kitchen

Plural component mixing equipment

Supply & Circulation Pumps

Sealed 4-Ball Lowers

Paint Kitchen Accessories

Air Spray Guns

Electrostatic Spray Guns

ProBell

ProMix PD POSITIVE DISPLACEMENT PUMP SYSTEM

ProDispense System

Electrostatic paint gun case study:

Finishing solutions for automotive components

Automotive Tier 1 Supplier Accomplishes More with Less Equipment

Finishing solutions for backlit displays

Automotive Tier 1 Supplier Accomplishes More with Less Equipment

3 steps to VOC reduction in industrial painting

Error Submitting

Message Received

Technical Support

+32 89 770 847

General Support

+32 89 770 865