Python XL-DA25
Python® XL-DA25 Pneumatic Chemical Injection Pump, 7-1/2 in. Air Motor, 1 in. Chromex Coated Plunger, FFKM Seals, ATEX Approved
Part Number: A24713



Python XL-DA25
Python® XL-DA25 Pneumatic Chemical Injection Pump, 7-1/2 in. Air Motor, 1 in. Chromex Coated Plunger, FFKM Seals, ATEX Approved
Part Number: A24713
The Python XL-DA25 is a product line extension to the current Python XL-DA product family so it uses the same double-acting technology and can achieve nearly double the flow rate of a similar single-acting pump. The Python XL-DA25 comes with a 2.5 inch pump stroke covering a wide range of flow rates...
More Info
Features
Product Brochure(English Only)
The Python XL-DA25 is a product line extension to the current Python XL-DA product family so it uses the same double-acting technology and can achieve nearly double the flow rate of a similar single-acting pump. The Python XL-DA25 comes with a 2.5 inch pump stroke covering a wide range of flow rates. These pumps operate on low gas or compressed air pressures and utilise the same Merkur® air motor used on other Graco products. The wetted parts are all 316 stainless steel and the air motor comes with a Graco proprietary coating suitable for off-shore applications.
- Double-Acting
- Pumps fluid in both directions of the stroke for increased flows
- Provides continuous flow operation for better pump efficiencies
- 2.5 inch pump stroke for high flow rates
- Self-Priming
- Anti-locking so air cannot get trapped inside air motor and stall pump
- Pump can free itself of air and resume pumping without any adjustments
- Ease of Serviceability
- Simple pump design for quick seals replacement
- Pumps are installed vertically for a reduced footprint •Minimum number of tools required
- Environmentally friendly
- Gas recovery kit available for zero emissions!
- Recoverable exhaust gas with kit
- Less fugitive emissions
(English Only)
Specifications & Documents
Technical Specifications
Convert to ImperialAir Inlet Size (in) | 1 |
---|---|
Air Inlet Thread Gender | Male |
Air Inlet Thread Type | NPT |
Air Motor Size (in) | 7-1/2 |
Approvals | ATEX |
Fluid Inlet Type | NPT |
Fluid Outlet Size (in) | 1/4 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NF4 |
Maximum Cycle Rate (CPM) | 60 |
Maximum Flow Rate (GPD) | 1388 |
Maximum Working Pressure (MPa) | 42.1 |
Maximum Working Pressure (psi) | 6100 |
Minimum Air Inlet Pressure (psi) | 15 |
Minimum Flow Rate (GPM) | 260 |
Model | Python |
Plunger Size (in) | 1 |
Series | XL-DA25 |
Type | Pneumatic chemical pump |
Weight (lb) | 65.56 |
Air Inlet Size (in) | 1 |
Air Inlet Size (mm) | 25.4 |
Air Inlet Thread Gender | Male |
Air Inlet Thread Type | NPT |
Air Motor Size (in) | 7-1/2 |
Approvals | ATEX |
Fluid Inlet Type | NPT |
Fluid Outlet Size (in) | 1/4 |
Fluid Outlet Size (mm) | 6.35 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NF4 |
Maximum Cycle Rate (CPM) | 60 |
Maximum Working Pressure (MPa) | 42.1 |
Maximum Working Pressure (bar) | 421 |
Maximum Working Pressure (kPa) | 42100 |
Maximum Working Pressure (psi) | 6100 |
Minimum Air Inlet Pressure (psi) | 15 |
Model | Python |
Series | XL-DA25 |
Type | Pneumatic chemical pump |
Weight (kg) | 29.8 |