Cart
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, Stand
Part Number: YB4441
Image is for illustrative purposes only.
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, Stand
Part Number: YB4441
Direct current (DC) circulation pump with intelligent (i) control drive efficiency and sustainability for high volume industrial paint circulation. The 4-ball lower’s 3,000 cc configuration powers maximum continuous flow rate.
Features
Direct current (DC) circulation pump with intelligent (i) control drive efficiency and sustainability for high volume industrial paint circulation. The 4-ball lower’s 3,000 cc configuration powers maximum continuous flow rate.
Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 5 horse power (HP) motor simply needs an annual oil change to keep running efficiently.
- ATEX, IECEx, JPNEx, CCCEx and KCS certifications confirm safe operation worldwide.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- Stainless steel (SST) lower is coated with Ultralife for extensive durability.
- Floor stand has a compact footprint with a space-saving vertical design.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
| Cycles per Gallon | 1.3 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Thread Type | Sanitary quick clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Thread Type | Sanitary quick clamp |
| Fluid Section Type | Sealed 4-ball |
| Includes | Basic controls, floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Lower Type | Sealed 4-ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 15.9 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 2.8 |
| Maximum Working Pressure (psi) | 400 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 5 |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
| Cycles per Gallon | 1.3 |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Type | Sanitary quick clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Outlet Thread Type | Sanitary quick clamp |
| Fluid Section Type | Sealed 4-ball |
| Includes | Basic controls, floor stand |
| Input Voltage (V ac) | 380 - 480 |
| Lower Type | Sealed 4-ball |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 60 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 2.8 |
| Maximum Working Pressure (bar) | 27.6 |
| Maximum Working Pressure (kPa) | 2758 |
| Maximum Working Pressure (psi) | 400 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | AC |
| Output per Cycle (cm³) | 3000 |
| Portable | Non-Portable |
| Series | Dci 4-Ball |
| Type | Electric Piston Pump |
Product Manuals
